Flexible custom sawing solutions ֢֠ Circular saws for steel and aluminium ● Circular saws KKS E H ֖ DH R ֢֠ Band saws for steel and aluminium Systems for steel construction/service centers ■ Circular/band sawing machines ■ Drilling machines for steel sections ■ Plate processing centres ■ Coping robots■ Punching/shearing lines >

The first universal circular saw equipped with an upstrokingӔ sawblade and a rotating table for metal was realised by KALTEN- BACH: the KKS range. More than four decades have passed since then. Thousands of units were built during this period. Technology and design of the KKS range have advanced over the years. The proven KALTENBACH principle of the upstrokingӔ saw offers the following advantages: saw table is freely accessible from the front sawblade remains safely in the machine housing while the mate- rial is positioned and removed material is ergonomically trans- ported, clamped and cut saw...

FEATURES KKS | 2 3 The strong drive train ensures high performance and low noise levels for the KKS 400 / KKS 450 ranges.The well-proven method of guiding the saw arm using a robust trunnion bearing is practically free of wear.It is rigid and permits work to very tight tolerances. Setting of cutting speed and feed is very easy, even for an unskilled operator. Effective cooling of the sawblade with flood coolant or optionally by an atomised lubrication system and efficient chip removal ensures long blade life. > The cutting range of the KKS 400 / KKS 450 covers a wide range of sections. KKS 400...

The KKS 400 E and KKS 450 E are particularly suited for one-off and small batch work. They are fully fledged semi-automatic cold circular saws with capability. The following sequence is initiated by push button: Clamping of workpiece Sawing operation Blade return Clamp releaseCutting height is electronically set via a key on all KKS models. Com- pact and user-friendly electronic controls are arranged on the right side of the machine.The wide front door facilitates fast and easy sawblade change, chip removal and replacement of the neoprene Vulkollan roller, as well as simple maintenance work on...

FEATURES KKS E H ֖ DH R | 4 ֖ 5 KKS 400 H / KKS 450 H The KKS 400 H and KKS 450 H semi-automatic universal circular saws are equipped with an increased output of the hydraulic unit and a long stroke clamping device which makes these circular saws high-performance and univer- sal mitre-cutting machines. > KKS 450 H KKS 450 R Semiautomatic sawing machine for straight cuts in tubes Features:Rigid vertical clamping vice attached to saw table with long stroke clamping cylinder Saw table prepared for atta-ching the clients jigsHydraulic sawblade feed, infi-nitely variableElectronic cutting stroke limita-tion...

Manual and NC controlled length measuring systems with output roller conveyor KALTENBACHs well proven modu-lar system permits the machine to be tailored to customer- specific requirements.Input and output roller conveyors are available in different lengths. Manual or NC-controlled length measuring equipment is also available. > KKS 400 E with L 40 NC length measuring system and T3 transport system L 45 E length measuring system L 45 I E length measuring system for manual adjustment of measuring length. High precision due to setting via vernier. Short measuring lengths by attacha-ble finger. Stop...

THE KALTENBACH RANGE Semi-/fully automatic circular sawing machines for metal and non-ferrous materialsSemi-/fully automatic bandsawing machines for solid material, profiles and structural sections Structural drilling machines Circular saw for structural sectionsCoping robots Punching/Shearing linesPlate processing centres Kaltenbach 2008 ɢ֠ Kaltenbach reserves the right to alter specifications without further notice ■ Printed in Germany 01/2008 Kaltenbach GmbH + Co. KG Postfach 17 40 ■ D-79507 LrrachTel.: +49 (0) 7621 / 175-0 Fax: +49 (0) 7621 / 175-477 [email protected] >