KALEJA GmbH D-73553 Alfdorf A1 A 2 2A Electronic load relay DC in modular technology freely connectable electronic output contact as NO contact for switching currents up to 10A optimized for inductive loads To snap onto DIN rail EN 50022 and EN 50035 Short designation / type Technical data: input circuit Rated voltage Range of rated voltage min. / max. Input current at rated voltage Input circuit Status indicator 24VDC 18VDC - 35VDC 5 mA inverse-polarity protection LED 3mm yellow Technical data: output circuit Range of switching voltage Max. permanent load current Leakage current @ Uin = 0V Impulse current On time / off time Output circuit Other data: Ambient temperature range function isolation input / output circuit Absence of vibration a/r (10...500Hz) Overload protection / short-circuit-proof / temp. monitoring Position of installation / mounting Mode of connection: screw terminal Dimensions: W x D x H MOS-FET output stage 5VDC - 35VDC -20°C - + 40°C 100V > 20 / 5 no / no / no can be snsapped, addable single wire 4mm², fine wire 2,5mm² 17mm x 65mm x 77mm 14.08.2018 AT - Errors and technical modification subject to change. Reproduction as well as electronic duplication only with our written permission. All rights reseved. © KALEJA GmbH 2