Housing, terminal, printed circuit board _UL94 HB 17.08.2018 KL - Errors and technical modification subject to change. All rights reserved. KALEJA GmbH Strubelweg 14 D-73553 Alfdorf, Germany Phone: +49 7172 93711 0 [email protected]

Datasheet Maxi-IM-5-30 05.02.308 Description The module Maxi-IM-5-60 is a motor choke for brushed motors. In most cases, this module is only necessary in conjunction with a PWM motor controller. Using this module provides the following advantages: lower currrent peaks Di/ Dt, better EMC properties of the system, less heating in the motor, in-rush current is reduced. If a motor is used which has very low-impedance and has a low armature inductance, it is possible that the motor control detects a short circuit although none is present. By using this module, the short circuit detection can be improved...

| Safety notes Maximum operational data The maximum operating data may not be exceeded. Installation The installation and start-up must be performed by specialist personnel exclusively. All affected components must be disconnected from the mains. Start-up For the first start-up, the motor should be operated without load. Risk of death Do not touch live parts after switching on! The assembly must be operated exclusively on safety extra-low voltage. With operation on extra-low voltage (e.g. via autotransformer), death or injury can occur. Fire protection The assembly must be installed in a switch...