*mydirectindustry

06.04.075

Product catalog summary

Overview: The document describes the specifications and functionalities of the M-4Q-10-30, a four-quadrant motor control system designed for 24VDC brush sticking direct current (DC) motors. It includes features such as soft start, speed regulation, and current control.

Specifications:

Input Circuit: Nominal voltage is 24VDC with a control voltage range of 19V to 32VDC. Input current at nominal voltage is 10mA, and the analogue input for rotational speed control ranges from 0V to 10VDC.
Output Circuit: The starting ramp (Tr2) is adjustable from 0.1 to 5 seconds for a soft start. The maximum rated load current is 10A, with a current limitation range (Tr3) from 1A to 10A. The signal output current monitor has a maximum of 50mA, and dynamic braking is available.
Power Driver: Utilizes MOS-FET technology with IxR amplification for speed compensation by increasing resistance.
Environmental Specifications: The allowable ambient temperature ranges from -20°C to +60°C. The device complies with DIN VDE regulations and can be mounted on DIN rails EN 50022 and EN 50035.
Physical Specifications: The case dimensions are 45mm x 75mm x 105mm, and it supports single wire connections up to 4mm².

Functionalities:

Speed Control: Speed regulation can be set via a potentiometer or an analog voltage input. The system allows for setting maximum speed and starting time.
Current Control: The system includes current limitation and adjustment features. It can switch between current limitation and switch-off modes based on the settings.
Dynamic Braking: The system supports dynamic braking, which can be activated or deactivated as needed.

Additional Features:

Overload protection, short-circuit proof, and temperature monitoring are included for enhanced safety.
A status indicator LED provides visual feedback on system status.

Applications: The multifunction controller is suitable for applications requiring speed control, ramp function, current control, and current adjustment for DC motors.

Catalog excerpts

Open the catalog to page 1

Description Module M-4Q-10-30 is a four-quadrant motor control system with soft start / speed regulation for DC motors.It ensures switching ON / OFF as well as the controlled and defined driving of motors. Speed regulation of motors can be set via a potentiometer or an analog voltage 0 - 10 VDC. The trimmer Tr2 ( ramp ) is used to set the starting time of the motors from 0,1s to 5s. Trimmer Tr3 (IxR) is used to set IxR compensation, i.e., in case of load variations at the motor, the IxR compensation tries to keep the speed of the motor constant. Trimmer 4 (current) is used to set the admissible...

Open the catalog to page 2

All KALEJA GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list