*mydirectindustry

06.04.039

Product catalog summary

Overview: The M-1Q-6-30 is a motor-speed control module designed for 24VDC brush sticking direct current motors. It is compatible with DIN-rail standards EN 50022 and EN 50035, and features a single-quadrant operation with IxR regulation.

Technical Specifications:

Input Circuit: Rated voltage is 24VDC with an input current of 10mA. The analogue input range is 0V to 10VDC, indicated by a 3mm yellow LED.
Output Circuit: The switching voltage range is 18V to 35VDC, with a maximum permanent load current of 6A. Short-circuit current ranges from 70 to 80A, detected in less than 25ms. The power driver is a MOS-FET.
Environmental and Safety: Operates within an ambient temperature range of -20°C to +50°C. It includes overload protection, short-circuit proofing, and temperature monitoring, compliant with VDE 0110 and 0160 standards.
Physical Characteristics: Dimensions are 45mm x 75mm x 105mm, with a construction width of 45mm. It can be mounted using screw terminals or pluggable connections.

Functional Features:

IxR regulation is adjustable, allowing for compensation from 0 to maximum. The amplification can be modified via bridges at connection terminals S+, S1, S2, and S3.
Dynamic braking is not activated due to a bridge at terminals Dyn 1 and Dyn 2.
Short-circuit, temperature, and overload protections are integrated.

Connection Terminals:

Bridges at S+ and S1, S2, S3 adjust the motor type resistance and compensation in mV per A, ranging from low to maximum amplification.

Additional Information: The module is designed for easy installation and maintenance, with optional bridges for dynamic braking and IxR amplification. It supports external potentiometer connections for speed adjustments.

Catalog excerpts

Open the catalog to page 1

Description The M-1Q-6-30 module is a single-quadrant motor control system for 24VDC motors. It ensures switching ON/OFF and an IxR regulation of 0 - max. compensation. The basic amplification can be changed over via a bridge at the connection terminals S+, S1, S2 and S3. Dynamic braking is not activated due to a bridge at the connection terminals Dyn 1 and Dyn 2. Special features: Short-circuit protection, temperature protection, overload protected, analog input 0 to 10V for motor speed, adjustable IxR amplification. Function of connection terminals S+, S1, S2, S3 Function Motor type resistance...

Open the catalog to page 2

All KALEJA GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list