*mydirectindustry

06.04.008

Product catalog summary

Overview: The document describes the M-S-6-30 motor-speed control module designed for brush sticking direct current motors operating at 24VDC. It is compatible with DIN-rail standards EN 50022 and EN 50035.

Technical Specifications:

Input Circuit: Rated voltage is 24VDC with an input current of 10mA. The analogue input voltage range is 0V to 10VDC, and it includes a 3mm yellow LED status indicator.
Output Circuit: The switching voltage range is 18V to 35VDC with a maximum load current of 6A. The starting and deceleration ramp times are adjustable between 20 to 2000 ms. The speed is adjustable via an analogue input of 0V to 10V.
Other Data: The module operates within an ambient temperature range of -20°C to +50°C and includes overload, short-circuit, and temperature protection. It complies with VDE 0110 and 0160 standards in parts.
Physical Characteristics: The module dimensions are 45mm x 75mm x 105mm, and it can be mounted using screw terminals or pluggable connections.

Features: The M-S-6-30 module provides controlled acceleration and deceleration of motors, with adjustable ramp times and maximum speed settings. It includes protections against short-circuits, temperature, and overload.

Installation and Connection: The module is designed for easy installation on a DIN rail and supports single wire connections up to 4mm² and fine wire connections up to 2.5mm².

Manufacturer: KALEJA GmbH, located in D-73553 Alfdorf.

Catalog excerpts

25.11.2016 AT - Errors and technical modification subject to change. Reproduction as well as electronic duplication only with our written permission. All rights reseved. © KALEJA GmbH 2015

Open the catalog to page 1

Description The M-S-6-30 module is a two-quadrant motor control system for 24VDC motors. It ensures switching ON/OFF and the controlled and definite driving and braking of motors. The load will short-circuited in OFF conditions after deceleration-rate. Special features: Short-circuit protection, temperature protection, overload protected, analog input 0 to 10V for motor speed. Acceleration-rate and deceleration-rate adjustable. Analog Digital standard circuit elements adjusting of starting ramp adjusting of stop ramp Logic voltage

Open the catalog to page 2

All KALEJA GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list