*mydirectindustry

06.04.007

Product catalog summary

Overview: The document describes the Maxi-S-4-30 motor control module designed for brush sticking direct current motors operating at 24VDC. It is suitable for mounting on DIN rails EN 50022 and EN 50035 and is manufactured by KALEJA GmbH.

Technical Specifications:

Input Circuit: Rated voltage is 24VDC with an input current of 10mA. The analogue input voltage range is 0V to 10VDC, and it includes a 3mm yellow LED status indicator.
Output Circuit: The switching voltage range is 19V to 35VDC with a maximum permanent load current of 4A. The starting ramp time is adjustable between 0 to 1000ms, and the forward resistance at ON-state is 20 mOhm.
Other Data: The module operates within an ambient temperature range of -20°C to +50°C and includes overload protection, short-circuit-proof features, and temperature monitoring. It complies with VDE 0110 and 0160 standards.
Physical Characteristics: The dimensions are 22.5mm x 75mm x 102mm, and it supports single wire connections up to 4mm² and fine wire connections up to 2.5mm².

Functional Description: The Maxi-S-4-30 module facilitates motor control with adjustable acceleration and deceleration rates. It provides dynamic braking by short-circuiting the load over an external resistance when turned off. The module is equipped with short-circuit protection against ground, temperature protection, and is optimized for use with inductive loads.

Installation and Connection: The module can be snapped onto DIN rails and connected via screw terminals. It includes a potentiometer for adjusting the starting ramp.

Special Features: The module is designed for dynamic braking and includes features for short-circuit protection, temperature monitoring, and is suitable for use with inductive loads.

Catalog excerpts

25.11.2016 AT - Errors and technical modification subject to change. Reproduction as well as electronic duplication only with our written permission. All rights reseved. © KALEJA GmbH 2015

Open the catalog to page 1

Description The Maxi-S-4-30 module is a motor control system with acceleration-rate/deceleration-rate for 24VDC motors. It ensures switching ON/OFF ant the definite driving and braking of motors, solenoid valves and other loads. The load is short-circuited over an extern resistance in OFF conditions wich result in dynamical braking, dependent from extern resistance value. Special features: Short-circuit protection against GND, temperature protection, specialize for the use at inductances, adjustable time until the motor reach its max. speed. Electrical connection and controls Poti to adjust the...

Open the catalog to page 2

All KALEJA GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list