- Catalogs
- KALEJA GmbH
- 02.01.116
02.01.116
02.01.116
This document provides technical specifications for an electronic load relay designed for DC applications. It is suitable for large switching currents and low switching frequencies, with a compact construction width of 12mm. The relay is designed to be mounted on DIN rails EN 50022 and EN 50035.
- Threshold Voltage: 24VDC
- Construction Width: 12mm
- Input Circuit: Rated voltage of 24VDC with a range of 18V to 35VDC, input current of 5mA, and a yellow LED status indicator.
- Output Circuit: Switching voltage range from 5VDC to 35VDC, maximum permanent load current of 5A, minimum load current of 1mA, impulse current between 25A and 35A, and a switching frequency of 100 Hz. The output circuit is floating with a 2-conductor connection and a maximum leakage current of less than 200 µA when off.
- Other Data: Ambient temperature range from -20°C to +60°C, insulation voltage between input and output of 2.5KV eff., and compliance with VDE 0110 standards. The relay is not equipped with overload protection, short-circuit-proof, or temperature monitoring features.
- Installation: The relay can be snapped onto a DIN rail and is addable. It uses screw terminals for connections, supporting single wire up to 4mm² and fine wire up to 2.5mm².
- Dimensions: 12mm x 56mm x 67mm
- Vibration Resistance: Absence of vibration a/r (10...500Hz) > 20 / 5
- Control Voltage: 24VDC
- Suitability: Suitable for inductive loads
KALEJA GmbH, D-73553 Alfdorf
Errors and technical modifications are subject to change. Reproduction or electronic duplication requires written permission from KALEJA GmbH. All rights reserved. © KALEJA GmbH 2015
Catalog excerpts
KALEJA GmbH D-73553 Alfdorf Implementation for large switching current and small switching frequency Suitable for inductive loads Indirect-coupled between input circuit and output circuit To snap onto DIN - rail EN 50022 and Eli50035 Construction width: 12mm 14.07.2015 AT - Errors and technical modification subject to change. Reproduction as well as electronic duplication only with our written permission. All rights reseved. © KALEJA GmbH 2015
Open the catalog to page 1All KALEJA GmbH catalogs and technical brochures
M5-2QB-12-48 06.38.0079 Pages
M5-BL-12-48 06.38.0019 Pages
M-MWS-6-301 Page
M-MRI-3-302 Pages
M-BL-5-302 Pages
M-MZ-4-302 Pages
Maxi-1Q-4-302 Pages
M-1Q-6-302 Pages
M-4Q-6-302 Pages
M-2Q-6-302 Pages
MAXI-GMF-8-304 Pages
M-S-6-302 Pages
Maxi-S-4-302 Pages
MAXI-MW-8-304 Pages
M2-CMR-5-30 06.34.0186 Pages
Mini-SO-50-301 Page
Mini-OM-50-301 Page
Mini-OM-08-301 Page
M2-MR-5-306 Pages
02.01.115_Mini-OM-25-301 Page
06.04.2024 Pages
06.04.201_Maxi-M-8-304 Pages
M3-4Q-5-307 Pages
M3-2QB-5-127 Pages
M2-MWI-6-307 Pages
M2-MWS-6-307 Pages
M2-3DR-5-308 Pages
Maxi-IMD-5-603 Pages
Maxi-IM-5-603 Pages
MB-121 Page
Midi-OM-100-301 Page
USV-S-9-B1 Page
USV-S-25-S1 Page
06.04.0322 Pages
M3-2QB-5-307 Pages
M2-MWT-6-307 Pages
06.34.0082 Pages
06.34.0067 Pages
06.34.0026 Pages
01.01.2121 Page
01.01.2131 Page
02.01.1041 Page
02.01.1171 Page
02.01.1301 Page
02.03.2261 Page
02.06.2011 Page
04.08.0011 Page
06.04.0072 Pages
06.04.0082 Pages
06.04.0121 Page
06.04.0141 Page
06.04.0162 Pages
06.04.0192 Pages
06.04.0212 Pages
06.04.0252 Pages
06.04.0312 Pages
06.04.0392 Pages
06.04.0462 Pages
06.04.0482 Pages
06.04.0492 Pages
06.04.0512 Pages
06.04.0542 Pages
06.04.0562 Pages
06.04.0592 Pages
06.04.0662 Pages
06.04.0752 Pages
06.04.0781 Page
06.04.0832 Pages
06.04.0852 Pages
06.04.0932 Pages
06.34.0015 Pages
01.01.0121 Page
01.01.011E1 Page
01.01.0071 Page
- Switching relay
- Motor controller
- DC motor controller
- Solid state relay
- Speed controller
- Choke coil
- Brushless motor control
- Digital input motor controller
- DC solid state relay
- Motor controller with speed control
- Compact motor controller
- Digital output motor controller
- Analog input motor controller
- DC speed controller
- Current choke
- Brushed motor controller
- Analog motor controller
- Open-loop motor controller
- DIN rail solid state relay
- Torque control motor controller