Kalamazoo Industries Full Line Catalog
24Pages

FULL LINE CATALOG ABRASIVE SAWS BELT SANDERS DISC SANDERS LATHE CHUCKS INDEX FIXTURES DUST COLLECTORS VIBRATORY FINISHERS SCAN TO VIEW WEBSITE " : -r- CATALOG K17

10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE 8" CUT- OFF SAW - 3 HP Cast iron BASE PROVIDES RIGID ALIGNMENT Handles 1" solid round, 2" pipe. Adjustable work length stop and down stop furnished. 1/2" wheel arbor. Dimensions - L 22" x W 10" x H 14" MODEL K7B 7" abrasive cut-off saw. 1 HP TEFC motor, 1 PH (110/220V). Please specify voltage. With cord and switch. Less abrasive wheel. 110 lbs. Spindle RPM - 4800. More capacity, cuts 1-1/2" solid, 2" pipe. 1/2" wheel arbor. Spark deflectors, front and rear, standard. Dimensions - L 22" x W 10" x H 14" MODEL K8B 8" abrasive cut-off...

12" and 14" SAWS - 5 HP These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. • Extra-heavy Cast iron base, trunnion and arm. • Sealed ball bearings, 1" wheel arbor. • Positive, quick-lock swivel vise, opens 4". • Dual V-belt drive. • 5 HP, TEFC. 1 PH (220 volt only) or 3 PH (220 or 440V, please specify voltage). • Spindle RPM – 4400. • Dimensions – L 22" x W 14" x H 24". • Less abrasive wheel. Bench Saw, swivel vise, magnetic switch Floor Saw, swivel vise, magnetic switch Floor Saw, chain vise, magnetic switch Magnetic switch. 2200 spindle speed with...

5 HP, 3 PH 1725 RPM TEFC motor, 12 amps @ 230V, 6 amps @ 460V. Semi-automatic, air/oil power down feed, 0-12 FPM. Dual moveable 4" screw vises. Capacity 2-1/2" solid, 3" shapes. Magnetic switch. Internal halogen light – 24 volt. 1" wheel arbor, 12" or 14" blade, not included (32mm optional). Dual coolant nozzles. 2200 spindle speed at 1725 RPM. Flood coolant, 10 gal., 1/3 HP. Dimensions — L 39" x W 26" x H 60". Options: Oscillation, T slot table, door interlocks, stock conveyors, air vises, Y axis sliding table, 575 volt, 50Hz/400 volt. MODEL K12-14MS 5 HP, 3 PH TEFC (220/440V); please...

16" or 18" diameter abrasive wheel, not included. Rugged cast iron trunnion and arm. Super rigid, super accurate. Heavy-duty guards, efficient spark chute. Fast, foot-operated chain vise. 1" wheel arbor. Sealed ball bearings. Table 16" wide x 28" deep. Capacity 3" solid, 4" pipe. 2500 spindle RPM. 10 HP TEFC motor. 24 amps @ 230V, 12 amps @ 460V. Dimensions — L 41" x W 24" x H 55". MODEL K16-18 10 HP TEFC saw duty motor, 3 phase (220/440V); please specify. Magnetic starter with overload protection. Less abrasive wheel. Wt. 600 lbs. PH-20 Options Available Power down feed, oscillation, air...

MODEL K20SW-PHV Shown with optional power down feed system Capacity: 4" solid, 6" shapes. Air-over-oil precise feed control. 0 –12 FPM feed rate. Air chain vise. Coolant pump, 10 gal., 1/3 HP. Cast iron upper arm/trunnions. Dual coolant hoses. Magnetic switch. Steel saw top, 27" x 30". Semi-automatic operation — saw head returns at end of cut. Manual stock feed. 0 –100 PSI air required. Spindle speed: 1,950 RPM. Table dimensions: 12"x27". Dimensions : L 50" x W 34" x H 60". MODEL K20SW-PHV 15 HP TEFC, 3 PH, 220/440V, please specify voltage. Magnetic switch, power down feed, air vise,...

MODEL K20E • Totally enclosed cabinet, side access ports for long stock. • 15 HPSD motor, mag. starter, 36 amps @ 230V, 18 amps @ 460V. • V-belt drive, sealed ball bearings. • Capacities: 4" solid, 6" shapes. • Air chain vise. • 1" spindle arbor, 1950 RPM. • Coolant pump, 10 gal., 1/3 HP. • Dual coolant hoses. • Internal light. • Front and side access doors. • Semi-automatic: saw head returns at end of cut. Manual stock feed. • Air over oil precise downfeed. • Adjustable down stop limits depth of cut. • Dimensions - L 50" x W 34" x H 80". • Options: Oscillation, T slot table, door...

MODEL K26E 26" abrasive saw. Wet or dry cut. Motor: 40 HP. Clamping options: cam vise, air chain. Totally enclosed with 6" outlet for dry cut. Power down feed — air/oil, 0-12 FPM. 1" wheel arbor, 7" flanges (optional 1 -3/4" arbor). 1200 RPM @ spindle (wet cutting), 1800 RPM (dry) Capacity 7" pipe, 5" solids, 8" shapes. Dimensions - L 61" x W 48" x H 92". Optional: Oscillation: gear/motor, coolant, wheel wear compensator, T slot table, door interlocks. MODEL K26E 40 HP, 3 PH motor 220/440V with mag switch. Totally enclosed. Wt. 2500 lbs. Options available: wet/coolant system, vacuum dust...

• Non-ferrous saw for cutting aluminum, brass, plastic. • Mitres 45° left or right. • Capacities: 4.5" at 90°. • 4" x 3.5" at 45°. • 4400 spindle speed at 3450 RPM. • Uses carbide tipped steel blade - not included. • 1" spindle. • Sealed ball bearings. • Twin v-belt drive. • Cast iron construction. • Dual cam-lock vise. • OSHA safety blade guard. MODEL KM14HS FOR CUTTING ALUMINUM AND OTHER NON-FERROUS MATERIAL WITH STEEL BLADE. Semi-automatic. 14" blade (not furnished). Double V-belt drive. 5 HP, 3PH, 1750 RPM with mag. starter. 4400 spindle speed at 3450 RPM. Power down feed, air/oil, 0 -...

ABRASIVE MITERING SAWS MODEL KM10 10" SAW – 3 HP • 0°– 45° left/right. • Spindle RPM — 4400. • Capacities — 2-1/2" solid, 3" pipe, 3.5" at 45°. • Dimensions — L 26" x W 24" x H 50". • Front table lock. • Heavy-duty stand. • • • • • • 0°– 45° left/right. Spindle RPM – 3450. Capacities — 1-1/2" solids, 2-1/2" shapes at 45°. Dimensions — L 25" x W 24" x H 17". Optional — WS10 workstop. Optional — 12M heavy-duty stand. MODEL KM10 3 HP, 1 PH (110/220V) or 3 PH (220/440V); please specify voltage. Mitres either direction 45°. 5/8" wheel arbor. Positive index holes and up/down stops. Two cam lock...