Kalamazoo catalogue
24Pages

ABRASIVE SAWS BELT SANDERS DISC SANDERS LATHE CHUCKS INDEX FIXTURES DUST COLLECTORS VIBRATORY FINISHERS

12" - 14" ABRASIVE METALLURGICAL SAW • • • • • • • • • • • • 5 HP, 3 PH 1725 RPM TEFC motor, 12 amps @ 230V, 6 amps @ 460V. Semi-automatic, air/oil power down feed, 0-12 FPM. Dual moveable 4" screw vises. Capacity 2-1/2" solid, 3" shapes. Magnetic switch. Internal halogen light – 24 volt. 1" wheel arbor, 12" or 14" blade, not included (32mm optional). Dual coolant nozzles. 2200 spindle speed at 1725 RPM. Flood coolant, 10 gal., 1/3 HP. Dimensions — L 39" x W 26" x H 60". Options: Oscillation, T slot table, door interlocks, stock conveyors, air vises, Y axis sliding table. MODEL K12-14MS 5...

16" - 18" CUT-OFF SAW MODEL K16-18 • • • • • • • • • • • 16" or 18" diameter abrasive wheel, not included. Rugged cast iron trunnion and arm. Super rigid, super accurate. Heavy-duty guards, efficient spark chute. Fast, foot-operated chain vise. 1" wheel arbor. Sealed ball bearings. Table 16" wide x 28" deep. Capacity 3" solid, 4" pipe. 2500 spindle RPM. 10 HP TEFC motor. 24 amps @ 230V, 12 amps @ 460V. Dimensions — L 41" x W 24" x H 55". MODEL K16-18 10 HP TEFC saw duty motor, 3 phase (220/440V); please specify. Magnetic starter with overload protection. Less abrasive wheel. Wt. 600 lbs....

LARGE CAPACITY ABRASIVE SAWS 26" - 44" DIAMETER BLADES MODEL K26E • • • • • • • • • • 26" abrasive saw. Wet or dry cut. Motor options: 20 thru 50 HP. Clamping options: cam vise, air chain. Totally enclosed with 6" outlet for dry cut. Power down feed — air/oil, 0–12 FPM. 1" wheel arbor, 7" flanges (optional 1-3/4" arbor). 1200 RPM @ spindle (wet cutting), 1800 RPM (dry) Capacity 7" pipe, 5" solids, 8" shapes. Dimensions — L 61" x W 48" x H 92". Optional: Oscillation: gear/motor, coolant, wheel wear compensator, T slot table, door interlocks. MODEL K26E 20 thru 50 HP, 3 PH motor 220/440V with...

HI-SPEED NONFERROUS MITRE SAW SEMI-AUTOMATIC NON-FERROUS SAW • Non-ferrous saw for cutting aluminum, brass, plastic. • Mitres 45° left or right. • Capacities: 4.5" at 90°. • 4" x 3.5" at 45°. • 4400 spindle speed at 3450 RPM. • Uses carbide tipped steel blade – not included. • 1" spindle. • Sealed ball bearings. • Twin v-belt drive. • Cast iron construction. • Dual cam-lock vise. • OSHA safety blade guard. FOR CUTTING ALUMINUM AND OTHER NON-FERROUS MATERIAL WITH STEEL BLADE. MODEL HSM14 • • • • • • MODEL KM14HS MODEL KM14HS 14" high speed non-ferrous mitre saw. 5 HP TEFC, 3 PH 220/440V...

ABRASIVE MITERING SAWS MODEL KM10 10" SAW – 3 HP MODEL KM14 14" SAW – 5 HP • 0°– 45° left/right. • Spindle RPM — 4400. • Capacities — 2-1/2" solid, 3" pipe, 3.5" at 45°. • Dimensions — L 26" x W 24" x H 50". • Front table lock. • Heavy-duty stand. • • • • • • 0°– 45° left/right. Spindle RPM – 3450. Capacities — 1-1/2" solids, 2-1/2" shapes at 45°. Dimensions — L 25" x W 24" x H 17". Optional — WS10 workstop. Optional — 12M heavy-duty stand. MODEL KM10 3 HP, 1 PH (110/220V) or 3 PH (220/440V); please specify voltage. Mitres either direction 45°. 5/8" wheel arbor. Positive index holes and...

10", 12", 14", 20" SAW ARM ASSEMBLIES ENGINEER YOUR OWN SYSTEM! MOUNT TO YOUR ASSEMBLY! AVAILABLE AS: ABRASIVE, NON-FERROUS, DRY CUT MANUAL OR SEMI-AUTOMATIC! HS14AS 12" - 14" blade K20AS KM20AS KM20AS 16,18,20" arm assy., 15 HP, 3 PH (220/440 60 hz), Less switch, single 4 bolt trunnion mount, 1" arbor, 1/2 round guard, abrasive only, Spindle RPM 2500, Less wheels, Please specify voltage, Weight: 390 lbs. K20AS 16,18,20" arm assy., abrasive or non-ferrous blades. 15 HP, 3 PH (220/440 volt 60 hz), 1" arbor, Spindle RPM 2500, dual trunnion mount, less wheels/blades, less switch, Please...

BELT SANDERS MODEL 1SM MODEL 2FSM MODEL 2FS MODEL 1SM 1/3 HP motor, 1 PH, 1725 RPM. 1" x 42" belt, 4" contact wheel, tilt table. Vertical sander only. 1800 SFPM. Wt. 35 lbs. MODEL 1SMV Enclosed guard, DCV-4 vacuum base. Wt. 95 lbs. MODEL 2FSMV MODEL 2FSM 1/2 HP motor, 1 PH, 3450 RPM. 2" x 48" belt, 5" contact wheel, tilt table and removable platen. Full hinged guard for quick belt change. Vertical or horizontal position. 4500 SFPM. Wt. 50 lbs. MODEL 2FS Less motor. Vertical or horizontal. 2" x 48" belt, tilt table, 5" contact wheel, removable platen and pulley V-belt. Wt. 30 lbs. BUILT-IN...

BELT SANDERS • • • • • • • • • • • • • MODEL 4" x 60" belt. 1 HP, 1 PH or 3 PH. Direct drive. 3450 RPM — 4" pulley. Platen — reversible 4" x 17". Table — Cast iron 4" x 6". 3600 SFPM. Full OSHA guard. Easy tracking. Quick belt change. Horizontal model available. Vacuum base 400 CFM. Dimensions — L 18" x W 26" x H 60". S460V MODEL S460D • • • • • • • • 4" x 60" belt. Direct drive. Reversible platen 4" x 17". Table — 4" x 6". Full OSHA guard. Easy tracking. Quick belt change. Dimensions — L 14" x W 16: x H 33". MODEL S460D 1 HP, 1 PH or 3 PH. Please specify voltage and phase. Manual switch....

6" BELT SANDERS MODEL S6MS • • • • • • • • • • • • 6" x 48" belt. Variable position. Direct drive (coupling). Cast iron frame. Quick-belt release. Full safety guard. Heavy-duty steel stand. 3 HP motor – 3450 RPM. 1 PH or 3 PH . Manual switch. 3500 SFPM. Reversible platen 6-1/2" x 14". • Cast iron table 6" x 10", 1/2" x 1/8" slot. 3 HP or 5 HP MODEL S6MV MODEL S6M Belt sander, less stand 6” x 48” belt, 3 HP saw duty motor with manual switch. 1 PH or 3 PH. Wt. 170 lbs. Dimensions: L 22" x W 14" x H 37". MODEL S6MS Same as above with stand. Wt. 230 lbs. Dimensions: L 22" x W 14" x H 56". MODEL...