Brandschutz
40Pages

Fire protection. Box, housing and sealing systems for fire-protection walls and ceilings.

For safe functions, rooms and escape routes. Fire-protection technology. When it comes to protecting buildings against danger from fire, planners and installers of building technology play a vital role. Experience shows that fires can start at any time and anywhere. Even strict fire regulations provide no guarantee against fire. The greatest risk is not caused by the fire itself, but by technical and electrical equipment. For 90% of fire victims and approximately 70% of property damage, not the fire itself, but the hazardous and toxic smoke produced by the fire was the main cause. So, in...

Legal requirements. Fire-protection technology. 4 Building material and fire-resistance classes. DIN 4102. 6 Keeps escape routes free in an emergency. KAISER AFS-technology. 8 KAISER has Europe-wide approvals for fire sealings! 9 KAISER installation. Easy and secure. 9 Safety and fire protection in electrical installation. Fire-resistant and halogen-free. 9 Anforderungen Installation in walls. Professional and standardised. For fire-protection wall up to EI120. Installation shafts and ducts. Easy-to-use installation compartment. Safe and secure in cavity...

Legal requirements. Fire-protection technology. As a result of federalism, building law in Germany is the responsibility of the Federal States. In a joint working group (ARGEBAU), the Federal ministries responsible for the building industry draw up sample draft laws which can, depending on the Federal State, and with more or fewer amendments, become valid as a law, regulation or guideline for that State. §14* of the standard building regulations (MBO) defines the basis for fire protection: The requirements of the building regulations and Federal State building regulations are supplemented...

tower blocks one recreation room FFL < 13 m Building classification 1 • Free-standing building up to 7 m high max. two usable units (max. 400 m2) and • Free-standing building for agricultural or forestry use fire-fighting operation with scaling ladders Building classification 2 • Up to 7 m high max. two usable units (max. 400 m2) Building classification 3 • Other buildings up to 7 m high Building classification 4 Up to 13 m high Usable units up to max. 400 m2 Building classification 5 • Other buildings including underground structures DIN 4102 defines the requirements in respect of the...

materials A1 non-combustibleelements without organic A2 non-combustible materials with organic elements B1 combustible materials flame-retardant B2 combustible materials normal flammability Building material classes and fire resistance classes. DIN 4102. The fire behaviour of building materials is influenced by the type, design, surface, mass, material combinations and processing technology. Building materials are grouped into classes A or B according to their fire behaviour: – non-combustible materials Building material class A1 - without organic elements A2 - with organic elements...

Technical information measurement points measurement points measurement points 1 + 2 Construction of F90 metal stud walling acc. to DIN 4102 part 4. 3 Construction of an El90 solid wall. 4 Sub-ceilings below rough ceilings in accordance with DIN 4102-4 of construction type I, II, III. The ceiling construction rough ceiling and sub-ceiling – provides the required fire resistance. 5 Independent sub-ceilings. The independent sub-ceiling provides the necessary fire resistance independently of the rough ceiling. 6 Fire load from the ceiling cavity. Walls and ceilings. DIN 4102. In all cases,...

Protects escape routes in emergencies. KAISER AFS-TECHNOLOGY. AFS – Active Fire Stop. This technology guarantees preventative, active fire protection. Whether a fire load comes from above, below, the front or the rear, the fast-acting insulation layer in boxes, housings and sealings reacts immediately, generating foam which reliably seals the installation opening. The fire-protection class of the ceiling is retained up to F30 and of the wall up to F90. This successfully prevents the spread of smoke and fire. In the event of a fire, KAISER AFS-technology maintains the fire-protection class...

Fire protection chtigt Ermä i f i z i e r t de r not u n d Ar ti ke l 10 vo m te s g em äß des Ra zur Anie Ri ch tlin mb er 1988 ts- und ch ze 21. De ung der Re sc hr ift en gle ich al tu ng sv ors t aa t en Ve rw M i t g li e d du kt e ro d er Ba up WG) üb er 06/E (89/1 päis Euro ichn lsbeze Handee name Trad . KG & CO MBH ER G KAIS oh 4 ühle Ramsl Schalksm 9 5857 KAISER fire-sealing systems – Europe-wide approval! KAISER’s innovative fire-sealings stand for certified, Europe-wide approval that you can rely on! All KAISER fire sealing systems are ideal for integration in expert electrical...

Professional and standardised. Fire-protection box flush-mounting. TECHNIK The innovative fire-protection box for flush-mounting installation in solid fire-protection walls maintains the fire-resistance duration of the fire-protection wall of El30 to El120 in spite of the electrical installation which is embedded in it. The new flush-mounting fire-protection box ensures safe, smokeproof closure of the fire-protection wall, even if in the case of opposing or one-sided installation the minimum remaining wall thickness of 60 mm (as specified by DIN 4102-4) is not present. AFS technology makes...

Fire protection | Flush-mounting fire-protection boxs • For fire protection walls EI30-EI120 • For minimum remaining wall thicknesses ≤ 60 mm • Also for directly opposing installation • Installation up to 5-unit combinations • Variable combination connection piece for conduits up to M25 • With fire-protection cover can be used as a junction box AFS technology maintains fire protection. Minimum remaining wall thickness ≤ 60 mm You can find suitable tools such as the universal opening cutter 1085-80 and the diamond grinding head 1088-02 on page 38.