Overview: The document provides detailed specifications for the VMC-168 model, a vertical machining center designed for precision and efficiency in manufacturing processes.

Travel: The machine offers a travel range of 1600 mm on the X-axis, 820 mm on the Y-axis, and 700 mm on the Z-axis. The spindle nose to table center distance ranges from 200 mm to 900 mm.

Table: The table dimensions are 1800 mm by 935 mm, with a maximum uniform load capacity of 2500 kgs. It features 7 T-slots with a width of 22 mm and a pitch of 125 mm.

Spindle: The spindle is available in a 6000 rpm gear head or a 10000 rpm direct-driven option, with two speed change steps. It has a spindle nose of No. 50 with a 7/24 taper and a main bearing bore diameter of 90 mm.

Feed: Rapid travel rates are 20 m/min for X and Y axes and 15 m/min for the Z-axis, with an optional increase to 24 m/min. The cutting speed rate is 10 m/min, and the manual JOG feed rate is adjustable in 20 steps up to 4 m/min.

ATC (Automatic Tool Changer): The machine uses a MAS BT-50 tool shank and pull stud, with a magazine capacity of 24 tools, expandable to 30 or 40. Maximum tool diameter is 108 mm (125 mm without adjacent tools), length is 300 mm, and weight is 15 kgs. Tool change times are 6 seconds (chip to chip) and 2.8 seconds (tool to tool).

Motor: The spindle motor power is 11 kW for 30 minutes and 15 kW continuously, with an optional increase to 15 kW and 18.5 kW. Feed motors for X, Y, and Z axes are 4.0 kW, 4.0 kW, and 7.0 kW, respectively. The coolant motor is 0.75 kW.

Power Supply: The machine requires an AC power supply of 200V/220V with a capacity of 35 kVA. Compressed air supply needs are 0.3 to 0.6 MPa at 500 l/min, and the coolant tank capacity is 420 liters.

External Dimensions: The machine's dimensions are 5317 mm in length, 3320 mm in width, and 3112 mm in height, with a net weight of 14500 kgs.

Note: Specifications are subject to change without notice, and optional features are available.