• Travel: X-axis: 1300 mm, Y-axis: 700 mm, Z-axis: 700 mm. Distance from spindle nose to table center: 200-900 mm.
• Table: Dimensions: 1500 x 700 mm, Max loading capacity: 1200 kgs, T-Slots: 5 x 18mm x 125mm.
• Spindle: Gear head speed: 6000 rpm, Direct-driven speed: 10000 rpm, Spindle nose: No. 50, 7/24 taper, Main bearing bore diameter: Ø90 mm.
• Feed: Rapid travel rate: X/Y: 24 m/min, Z: 20 m/min, Cutting speed rate: 10 m/min, Manual JOG feed rate: 4 m/min (20 steps).
• ATC (Automatic Tool Changer): Tool shank: MAS BT-50, Pull stud: MAS BT-50/P50T-1, Magazine capacity: 24 (Cam type), Max tool diameter: ø108 mm (ø125 mm without adjacent tools), Max tool length: 300 mm, Max tool weight: 15 kgs, Tool change time: Chip to Chip: 6 sec, Tool to Tool: 2.8 sec.
• Motor: Spindle power: 11/15 kW (30 min./continuous), Feed motor X/Y/Z: 4.0/4.0/7.0 kW, Coolant motor: 0.75 kW.
• Power Supply: AC200V/220V, 35 kVA, Compressed air supply: 0.3~0.6 MPa, 500 l/min, Coolant tank capacity: 420 l.
• External Dimensions: Length: 4480 mm, Width: 2840 mm, Height: 3270 mm, Net weight: 12000 kgs.

Note: Specifications are subject to change without notice.