video corpo

HDS 1000 De
20Pages

{{requestButtons}}

Catalog excerpts

HDS 1000 De - 1

HDS 1000 De The pioneering EASY!Force high-pressure gun is part of the heated HDS 1000 De high-pressure cleaner's standard equipment. Sturdy frame designed for crane or forklift loading. Economical, diesel-powered combustion engine Automatic burner cut-out in case of water shortage and overheating. Complies with the requirements of exhaust emissions standard EU STAGE V. The ergonomically designed spray gun reduces holding and pulling force. Electro start for effortless starting. Maximum performance User-friendly operation High-output burner with upright heating coil and detonation-free The speed is automatically reduced in standby mode. This protects continuous ignition. For removing stubborn encrustations. the engine and saves energy. Crane loading possible thanks to the sturdy tubular steel frame.

Open the catalog to page 1
HDS 1000 De - 2

TECHNICAL DATA AND EQUIPMENT  Diesel engine with electro start  Energy-saving EASY!Force high-pressure gun for fatigue-free work  Professional high-performance hot water machine Technical data Order no. Flow rate Consumption of heating oil or gas at full load Drive type Motor manufacturer Motor type Engine rating Stationary Light oil / Diesel Fuels Weight Equipment EASY!Force Advanced Spray gun High-pressure hose Spray lance Cage protective frame Anti-twist system Electro start Power nozzle Servo control sturdy tubular steel frame for handling with crane  Included in the scope of supply.

Open the catalog to page 2
HDS 1000 De - 3

Flow rate Trigger guns EASY!Force Advanced EASY!Force conversion kit 1 - from high-pressure hose EASY!Force conversion kit 2 - from machine EASY!Force conversion kit 3 high-pressure gun Effortless, not energy-sapping: the EASY!Force high-pressure gun uses the recoil force of the high-pressure jet to reduce the holding force for the operator to zero. For retrofitting Kärcher high-pressure cleaners with existing high-pressure hose: EASY!Force conversion kit 1 with EASY!Force high-pressure gun, spray lance and all adapters through to the nozzle. Developed for retrofitting existing...

Open the catalog to page 3
HDS 1000 De - 4

Max. working pressure Length Rotating spray lances Spray lance Spray lance 1050 mm stainless steel lance (manual coupling) with ergonomic handle for ease of use and protection. Rotatable 360°  under pressure. Bright, lightweight LED work light for direct mounting on spray lance of EASY!Force high-pressure gun. Better view in  unfavourable lighting conditions for up to 5 working hours. Spray lance, 250 mm, rotatable, ergonomic  Spray lance, 400 mm, rotatable, ergonomic Spray lance extender 600 mm stainless steel lance (manual coupling) with ergonomic handle for ease of use and protection....

Open the catalog to page 4
HDS 1000 De - 5

Max. working pressure Length Additional handle Additional handle for EASY!Lock spray lances Comfortable in every situation – the additional handle is easy to attach to the spray lance of our new EASY!Lock generation and makes work easier by allowing you to adjust your posture to suit the particular task. Regularly changing  your posture relieves the strain on your body, making work more relaxed. Thanks to the 360°-rotatable spray lance, the additional handle can simply be fully rotated whilst working for greater flexibility.  Included in the scope of supply.  Available a

Open the catalog to page 5
HDS 1000 De - 6

Nozzle size Power nozzle spray angle 25° Power nozzle Fan jet nozzle with 25° spray angle, suitable for large areas  and removing stubborn dirt and stains. High-pressure nozzle with powerful jet for extremely stubborn dirt. Fan jet nozzle with 15° spray angle suitable for stubborn dirt. Power nozzle with a 40° spray angle and fan jet, suitable for  large areas and sensitive surfaces. HP nozzle spray angle 0° Power nozzle Power nozzle spray angle 15° Power nozzle Power nozzle spray angle 40° Power nozzle  Included in the scope of supply. 

Open the catalog to page 6
HDS 1000 De - 7

Max. working pressure Length Standard with unions on both sides High-pressure hose 15 m long high-pressure hose, DN 8, with ANTI!Twist and time-saving EASY!Lock manual screw fitting on both sides. High-pressure hose (DN 8) suitable up to 315 bar pressure. With innovative EASY!Lock manual screw fitting on both sides, ANTI!Twist and 10 m long. 20 m long high-pressure hose (DN 8) equipped with the time-saving and robust EASY!Lock manual screw fitting on both sides. Approved for pressures up to 315 bar. Comfortable length (30 m) and innovative EASY!Lock manual screw fitting: High-pressure hose...

Open the catalog to page 7
HDS 1000 De - 8

Max. working pressure Length With blue, non-marking and animal fat resistant outer covering: durable high-pressure hose (ID 8), 10 m long, AN TI!Twist and EASY!Lock hand screw connection at both ends. For connection to hose reels: high-pressure hose, with M 22 × 1.5 connection and curved EASY!Lock hand screw connec tion. 1.5 m long, suitable for up to 400 bar working pressure. Longlife food design with screw connections at both ends High-pressure hose food grade Longlife Special hoses High-pressure hose curved  Included in the scope of supply.  Available

Open the catalog to page 8
HDS 1000 De - 9

Max. working pressure Nozzle size Dirt blaster, large Dirt blaster The dirt blaster with rotating pencil jet offers 10 times better cleaning performance. Ceramic nozzle and bearing ring for a long service life. Further data: Max. 300 bar, 30 MPa, 85°C.  Included in the scope of supply.  Available acc

Open the catalog to page 9
HDS 1000 De - 10

Nozzle union Nozzle screws Nozzle screws with protectors for high-pressure and power  nozzles Cleaning agent injector Cleaning agent injector for high 2 4.637-032.0 and low pressure (without nozzles) Cleaning agent injector for high 3 4.637-033.0 pressure (without nozzle) Machine-specific nozzle kit with order no. 4.637-033.0 Nozzle kit 750–1000 l/h Detergent injector for independent high and low pressure dosage. Maximum dosage about 15%. Cleaning agent dosage at high pressure 3 - 5 % For HD/HDS 750 - 1000 l/h. Consists of nozzle insert + HP power nozzle + union Nozzle insert with order...

Open the catalog to page 10
HDS 1000 De - 11

Max. working pressure Nozzle size Pipe cleaning hose, ID 6 Pipe cleaning hose, ID 6, 10 m, max. 250 bar Pipe cleaning hose, ID 6, 20 m, max. 250 bar Pipe cleaning hose, ID 6, 30 m, max. 250 bar The 10 m pipe cleaning hose is a highly flexible high pressure hose for pipe interior cleaning (threaded connection for  nozzle R 1/8). The 20 m pipe cleaning hose is a highly flexible high pressure hose for pipe interior cleaning (threaded connection for  nozzle R 1/8). The 30 m pipe cleaning hose is a highly flexible high pressure hose for pipe interior cleaning (threaded connection for  nozzle...

Open the catalog to page 11

All KÄRCHER catalogs and technical brochures

  1. NT 48/1

    4 Pages

  2. SGG 1

    3 Pages

  3. WRP 16000

    4 Pages

  4. WPC 100 RO

    2 Pages

  5. WVP 10 Adv

    3 Pages

  6. AF 100

    3 Pages

  7. HD 9/23 De

    19 Pages

  8. KM 85/50 R Bp

    10 Pages

  9. Puzzi 30/4

    4 Pages

  10. HD 9/20-4 M

    20 Pages

  11. IB 15/120

    5 Pages

  12. HD 6/15 M St

    19 Pages

  13. HDS 5/12 C

    17 Pages

  14. WV 70

    3 Pages

  15. AB 20

    2 Pages

Archived catalogs