Steam Injector / Steam Lance for Vessel-Mounting Type IFA Mounting from the outside For the heating of vessels by means of direct steam feed, since many years we have injectors in our program, which insert steam directly into the vessel, below the water-level. In models oft he ILF/IFF/IGE-series it is usually necessary that a person enters into the vessel by a man-hole to install the equipment within the tank. For mounting the model IFA in a tank a free vessel standpipe or block flange is sufficient. Its nominal size must be one step larger concerning its dimension than the appropriate type of...

Multi-Stage Steam-Injectors for pipeline mounting To reduce the space requirements and material usage and costs, we have developed 2 - and 3-stage variants, which allow us to increase the performance of the steam injectors to 3-fold. Several internal parts are installed in only one Case and are supplied through an outer casing pipe with steam. All previously required flanges between the steps become no longer necessary. The outer dimensions have been reduced to a minimum and the result is an extremely compact device, which can be installed and connected with little effort. The devices are available...

Steam-Injector / Steam-Lance Model IFM multi-staged Multi-staged Heating of Tanks and Vessels To increase the performance of our injectors and to be able to inject more steam in a shorter time in a vessel, we have modified our models of the IFA- series. The units now have up to 5 additional injection nozzles in the transverse direction and furthermore the exit in the longitudinal direction. Through this the steam throughput of a steam lance of size DN 80 can be increased from 700 kg/h up to 2100 kg/h. If it was previously necessary to install several injectors in the vessel, these now can be...

Picture.: Steam-Lance with 5 transverse heating stages in opposite direction and 1 in longitudinal direction Picture.: Steam-Lance 3-staged without longitudinal stage Picture.: Steam-Lance 3+1 staged