Considering frame execution and contact points, Inch Reading Dial Thickness Gauges conform to the metric models. This also applies to the M 3 thread of the Dial Gauges which is the same as in the metric models of Thickness Gauges. The contact points are interchangeable between metric and inch models. Inch Reading Dial Thickness Gauges differ from the models illustrated in the catalogue for metric reading only by the scale division in inch and the scale marking. Thickness Gauges bearing the additional ,D' in their designation possess a digital indicating instrument. The display can be selected to be either metric or inch and therefore these instruments are listed in the table of metric models, too. Technical data for Inch Reading Thickness Gauges Model Reading Range Depth ofjaw Lifting device Contact points Contact points inch inch inch standard available on request KZ 15/2 .005 .800 .600 no 6.35 mm 0 flat convex or spherical JZ 45 .001 .400 1.800 yes 6.35 mm 0 flat convex or spherical JZ 50 with lifting device .001 .400 2.000 yes c a, b, d or e JD 50 with lifting device .0005 .500 2.000 yes c a, b, d or e JZ 50 R without side discs .001 .200 2.000 yes rollers without side discs JD 50 W .0005 .500 2.000 yes pin with collar for pipe walls flat 10 mm 0, spherical FD 50 with lifting device .00005 .500 2.000 yes c a, b, d or e The contact points listed in the column ,standard' will be mounted unless the order calls for specials. Dial Thickness Gauges can be supplied with contact points listed in the column ,available on request' without extra costs. Schematic diagrams of the contact points style a, b, c, d and e can be found on page 117.

Pocket Dial Thickness Gauge KZ 15 Pocket Dial Thickness Gauge JZ 15 The Pocket Dial Thickness Gauge KZ 15 is supplied with flat contact points 6.35 mm Ø if no other form of contact points is ordered. When ordering, please state whether you require another form of contact points than 6.35 mm Ø flat. The Pocket Dial Thickness Gauge JZ 15 distinguishes itself distinctly by its up to date and ergonomical design. The model KZ 15/2 differs from the model KZ 15 only by the to .800” extended measuring range. Pocket Dial Thickness Gauge KZ 15 The Pocket Dial Thickness Gauge JZ 15 is equipped with plastic...