1. Catalogs
  2. Kadzama
  3. Vibrating sieve

Vibrating sieve
1 /9Pages

Vibrating sieve

Vibrating sieve
1 /9Pages

Catalog excerpts

Vibrating sieve-2

This manual is designed for study the main technical characteristics, operating principle and rules of technical operation of a vibrating sieve. Before use carefully read the instructions below! Improper use of the equipment can be a source of danger. By starting work with the device you confirm that you are fully acquainted with this manual and understood the rules of operation of the device. KADZAMA appreciates your purchase and wishes you a pleasant work experience.

 Open the catalog to page 2
Vibrating sieve-3

Vibrating sieve is designed to filter chocolate from deficiently small for the perfect product pieces of cacao beans and from outside elements accidentally sneaked during grinding.

 Open the catalog to page 3
Vibrating sieve-4

4.1. Vibrating sieve is an electric appliance with a certain danger potential. When connecting the device to the electric grid, take all necessary precautions to avoid electric shock. 4.2. Vibrating sieve must be connected to the power supply and operated only by trained personnel. 4.3. It is not allowed to operate the vibrating sieve in the absence of electrical grounding («E» wire). 4.4. Vibrating sieve should be used only for its intended purpose. 4.5. Use and store the vibrating sieve in a place out of reach of children 4.6. Do not leave the vibrating sieve switched on without supervision...

 Open the catalog to page 4
Vibrating sieve-5

4.12. Repair or disassembly of the vibrating sieve may only be provided with the assistance of qualified personnel of KADZAMA.

 Open the catalog to page 5
Vibrating sieve-6

6.2. Set the vibrating sieve on a flat hard surface, providing easy access to controls. 6.3. Make sure that the distance between the body and the nearest objects is at least 10 cm. 6.4. Plug the equipment into a 220V power supply. 7.1. Set the sieve (3) on the body (1) and secure it with a retainer (4). 7.2. Vibrating sieve is ready to use, turn it on with the power control (2) clockwise. 7.3. Select the vibration intensity you need with the power control (2). 7.4. Place the container under the sieve, where the product will fall after sieving. 7.5. Fix the position of the vibrating sieve with...

 Open the catalog to page 6
Vibrating sieve-7

7.7. The filtered product will fill the container under the sieve. Control the level of its filling. 7.8. Deficiently small pieces of cacao beans and outside elements accidentally sneaked during grinding will be left on the sieve. Clean it as necessary. 8.1. During the operation keep the vibrating sieve clean. 8.2. It is allowed to wipe the body with a damp cloth, after disconnecting the vibrating sieve from the power supply.

 Open the catalog to page 7
Vibrating sieve-8

8.3. It is allowed to wash sieve under warm water and wash with detergents. After washing, the sieve must be dried. 9 — Warranty The warranty period (as well as the terms of warranty service) are specified in the warranty card.

 Open the catalog to page 8
Vibrating sieve-9

10 — Certificate of acceptance Vibrating sieve complies with stated specifications and is recognized as serviceable. kadzama.com [email protected] ——— Meets certification requiremen

 Open the catalog to page 9
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.