This manual is designed for study the main technical characteristics, operating principle and rules of technical operation of a panning machine 27 kg. Before use carefully read the instructions below! Improper use of the equipment can be a source of danger. By starting work with the device you confirm that you are fully acquainted with this manual and understood the rules of operation of the device. KADZAMA appreciates your purchase and wishes you a pleasant work experience.

Panning machine 27 kg is designed for «roNing» various substances on nuts, peanuts and other loose goods. Panning machine 27 kg — 1 pc. Manual — 1 pc.

4.1. Panning machine is an electric appliance with a certain danger potential. When connecting the device to the electric grid, take all necessary precautions to avoid electric shock. 4.2. Panning machine must be connected to the power supply and operated only by trained personnel. 4.3. It is not allowed to operate panning machine in the absence of electrical grounding («E» wire). 4.4. Panning machine should be used only for its intended purpose. 4.5. Use and store panning machine in a place out of reach of children 4.6. Do not leave panning machine switched on without supervision for a long...

4.11. Any maintenance should be carried out when panning machine is disconnected from the power supply! 4.12. Repair or disassembly of panning machine may only be provided with the assistance of qualified personnel of KADZAMA.

4 — Handwheel 5 — Control block 6.2. Set panning machine on a flat hard surface, providing easy access to controls. 6.3. Make sure that the distance between the body and the nearest objects is at least 10 cm, make sure the air vents are not blocked. 6.4. Fix the wheels with wheel clips. 6.5. Plug the equipment into a 220V power supply.

4 — Rotary speed control knob 5 — Emergency stop button 7.2. Operate the main drive using the START / STOP buttons. Place the required amount of loose product (nuts) in the bowl. 7.3. Pour a thin stream of, for example, glaze in a bowl. Rolling over the surface of the bowl, nuts are evenly glazed. You can pour the glaze again in a while and repeat this operation until the nuts acquire a sufficient layer. The round shape is formed gradually, as the layers of the glaze grow.

7.4. To obtain a smooth and a high-quality glaze layer, it must be cooled quickly. After the glaze has solidified on the nuts, the process will continue without sticking to the bowl and won’t interfere with the mixing of the dragees in panning machine. The air conditioner installed in the room can significantly reduce the time of panning. 7.5. After obtaining the layer you need, a glossier and various powders (for example, kandurin) can be added in order to improve the aesthetic appearance of the products. 7.6. After finishing work, the ready product must be removed from the bowl. To do it, tilt...

9 — Warranty The warranty period (as well as the terms of warranty service) are specified in the warranty card.

10 — Certificate of acceptance Panning machine 27 kg complies with stated specifications and is recognized as serviceable. kadzama.com [email protected] ——— Meets certification requirement