This manual is designed for study the main technical characteristics, operating principle and rules of technical operation of a melanger 85 kg. Improper use of the equipment can be a source of danger. By starting work with the device you confirm that you are fully acquainted with this manual and understood the rules of operation of the device. Melanger 85 kg is designed for grinding cacao beans, sugar, nuts and other dry ingredients to a paste substance.

4.1. Melanger is an electric appliance with a certain danger potential. When connecting the device to the electric grid, take all necessary precautions to avoid electric shock. 4.2. Melanger must be connected to the power supply and operated only by trained personnel. 4.3. It is not allowed to operate melanger in the absence of electrical grounding («E» wire). 4.4. Melanger should be used only for its intended purpose. 4.5. Use and store melanger in a place out of reach of children 4.6. Do not leave melanger switched on without supervision for a long time. 4.7. Do not operate melanger with wet...

4.10. When transporting melanger at sub zero temperatures, prior to first use it should be kept at room temperature for at least 1 hour. 4.11. Any maintenance should be carried out when melanger is disconnected from the power supply! 4.12. Repair or disassembly of melanger may only be provided with the assistance of qualified personnel of KADZAMA.

4 — Adjustable stones tensioner 6.2. Set melanger on a flat hard surface, providing easy access to controls. 6.3. Make sure that the distance between the body and the nearest objects is at least 10 cm, make sure the air vents are not blocked 6.4. Fix the wheels with wheel clips. 6.5. Make sure that the power cable: • Does not touch moving parts of the device; • Is not located under the device; • Does not touch hot parts of the device, such as an electric motor or heating elements. 6.6. Plug the equipment into a 220V power supply.

2 — START / STOP / Reverse buttons 3 — Rotation autospeed control panel 4 — Rotary speed control knob 5 — Emergency stop button 7.2. Operate the main drive using the START / STOP buttons. Melanger 85 kg is equipped with a lids. To start the tank rotation, cover it with lids, placing them both in slots over the

sensors. The tank rotation will stop as soon as the lid is removed. To restart the rotation, put the lid on the sensors and press the START button. The START button is also responsible for the reverse function: press and hold it while the melanger is working to change the direction of bowl rotation. Release the pressed START button so that the reverse rotation stops and returns to original rotation. 7.3. The rotation speed is controlled manually by knob (4) if the switcher on panel (3) is turned to OFF. To select automatic speed control set the upper temperature value on the controller (<— select...

7.6. The tensioner provides additional pressure on the stones to the bottom of the tank. That increases the productivity of melanger. When the pressure is reduced, the grinding process is slowing down, but the conching process continues with the same intensity. A gap between the spring coils must be at least 2-3 mm for the tensioner to work properly. 7.7. Unused millstones need some breaking-in to reach maximum grinding intensity (!). 7.8. Load the ingredients gradually in order to avoid tank jamming. 7.9. If there is cacao butter in the recipe, it may be added at the same time with cacao nibs....

7.10. Gradually add the ingredients you want to grind till paste substance into the tank. To make chocolate, gradually add roasted cacao nibs. Add sugar as soon as the mass becomes fluid. 7.11. After the work is complete, pour off the produced mass. To do this, you need to tighten nuts of the tensioner and bring the swing frame to the position you need to pour the mass, while rotating the handwheel (6). If your KADZAMA melanger does not start, check the conditions listed below. 8.1. The power cable of the equipment is not damaged and correctly connected to the device. 8.2. The socket, where the...

8.5. Red emergency stop button on the body of the equipment is not pressed (push it to check, then turn counterclockwise until OFF). 8.6. All equipment lids (if available in the set) are on. 8.7. Rotary speed control knob (potentiometer knob) is not (!) at 0. 8.8. The tank starts rotating when the knob is turned to the ON (if available) / pushing the START button (you will hear a click sound and the button itself lights up). 8.9. If all the conditions listed above are met and the tank does not start rotating — visually check the fan impeller of the electric motor. Inform KADZAMA manager with...

11 — Certificate of acceptance Melanger 85 kg complies with stated specifications and is recognized as serviceable. kadzama.com [email protected] ——— Meets certification requirement