*mydirectindustry

KONTI W Baler

Product catalog summary

KONTI W Baler J-Series Overview
Kadant PAAL's KONTI W channel baler is engineered for high performance in challenging environments, particularly in waste applications. The baler features a versatile tying system that can use either steel or plastic wire, designed to operate efficiently in wet and dirty conditions. Kadant PAAL, established in 1854, is a leading manufacturer of channel balers in Europe, having delivered over 30,000 machines since 1960.

Features and Benefits

Adjustable upper sliding guides replace rollers for enhanced durability.
Ram cover and channel walls are bolted for easy replacement.
Exchangeable HARDOX® wear plates protect press chamber walls.
Hydraulic sidewall slot covers and splash guards prevent contamination.
Special motors for the tying unit enhance performance.
Integrated hard-wearing bearings in replaceable mounting sleeves increase longevity.

Benefits include: Protection against water ingress, contamination prevention for the tying unit, increased durability, and low cost of ownership.

Technical Data and Measurements
The KONTI W Baler J-Series is available in models 500, 600, and 700, each with varying pressing forces, specific pressing forces, and driving power. The pressing force ranges from 122 t (1,197 kN) to 198 t (1,940 kN), with specific pressing forces from 99 N/cm² to 160 N/cm². The tunnel cross-section is consistent at 110 x 110 cm, with a hopper opening of 200 x 102 cm and a feeding volume of approximately 3.45 m³. The number of wires used is five across all models.

Performance Metrics

Press output (ideal) ranges from 430 m³/h to 1,320 m³/h depending on the model and load conditions.
Press capacity varies with material density, with outputs of up to 136 t/h at 300 kg/m³.

Dimensions
Dimensions for the KONTI W 500, 600, and 700 J-Series models are provided in millimeters, with specifications subject to change.

Contact Information
Kadant PAAL Limited is located at Lydford Road, Meadow Lane Industrial Estate, Alfreton, Derbyshire, DE55 7RQ, United Kingdom. For inquiries, contact +0845 519 0366 or visit www.kadantpaal.com.

Catalog excerpts

Channel Baling Press with Horizontal Wire Tying for Waste Applications Kadant PAAL's KONTI W channel baler is designed to guarantee performance in demanding applications. The tying system, which can be operated with either steel or plastic wire, has been specially designed to function effectively in wet and dirty environments. Kadant PAAL was founded in 1854 in Osnabruck, Germany. Since its introduction of the first continuously operated horizontal baler in 1960, PAAL has delivered more than 30,000 machines and today is the #1 channel baler manufacturer in Europe. KONTI W J-Series Baler Overview Features • Adjustable upper sliding guides instead of rollers • Ram cover and channel walls bolted for ease of replacement • Exchangeable HARDOX® wear plates for press chamber walls • Hydraulic sidewall slot covers and carefully sited splash guards • Special tying unit motors • Hard-wearing bearings integrated in replaceable mounting sleeves Benefits • Protection against water ingress • Tying unit protected from contamination • Increased durability • Low cost of ownership KADANT PAAL LIMITED

Open the catalog to page 1

KONTI W Baler J-Series Specifications are for reference only and subject to change. KONTI W Baler J-Series-1000 (BR EN) 1 1/2023 Replaces all previous versions © 2023 Kadant PAAL Limited KADANT PAAL LIMITED Lydford Road Meadow Lane Industrial Estate Alfreton, Derbyshire DE55 7RQ United Kingdom

Open the catalog to page 2

KONTI W Baler

KONTI W Baler

Catalog excerpts

All KADANT PAAL SAS catalogs and technical brochures