RINGROL 800 Semi-automatic coil winding machine Fig. 2 Example traversing unit RINGROL 800 This semi-automatic coil winder allows to wind materials such as cables, tubes etc. onto coilers. Simultaneously, the material can be measured and cut to length. The mounted extension unit with automatic traversing drive is provided for the installation of a length measuring device (additional equipment), a material cutter or a feeder unit. The machine works semi-automatically, the cable catch is manually fed into the winding core. The machine winds the coil automatically and stops upon reaching the pre-selected length. Afterwards, the wound coil is pushed to the desk of a binding device (accessories) by the operator in order to be wound finally. kabelmat®-drum storage racks are suitable for the direct winding. Fig. 4 Central adjustment of the guide rollers optional motor driven version available Technical Details Winding plate diameter Core diameter Dimensions and specifications may be changed without prior notice. Issue 10/2013. Winding height Operating height Coil weight Roation speed Line speed Electrical connection (CEE-connector plug) LxWxH Weight (without accessories) kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com

RINGROL 800 Semi-automatic coil winding machine Basic equipment: • • • • • • • • • • • • • • • • • Painted, solid steel profile frame to be screwed on the ground Protective hood is pneumatically opened and closed at a push of a button Proctective hood with safety switch integrated in the machine Horizontal winding desk with built-in winding plate Winding core pneumatically adjustable Infinitely variable core diameter Counter plate adjustable to coil width by push of a button Pneumatically liftable counter plate Traversing slide provided for additional units such as length measuring devices, material...