RINGROL 600 Semi-automatic coil winding machine Fig. 1: RINGROL 600 with opened protective cover and biniding unit Dimensions and specifications may be changed without prior notice. Issue 10/2013. Fig. 2: Example traversing unit Fig. 4: Cable fixing clamp for coiler head RINGROL 600 This semi-automatic coil winder allows to wind materials such as cables, tubes etc. onto coilers.Simultaneously, the material can be measured and cut to length. The mounted extension unit with automatic traversing drive is provided for the installation of a length measuring device (additional equipment), a material cutter or a feeder unit. The machine works semi-automatically, the cable catch is manually fed into the winding core. The machine winds the coil automatically and stops upon reaching the pre-selected length. Afterwards, the wound coil is pushed to the desk of a binding device (accessories) by the operator in order to be wound finally. kabelmat®-drum storage racks are suitable for the direct winding. Technical Details Winding plate diameter Core diameter Winding height Operating height Coil weight Roation speed Line speed Electrical connection (CEE-connector plug) L x W x H (without binding unit and closed protective cover) kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com

RINGROL 600 Semi-automatic coil winding machine Basic equipment: • • • • • • • • • • • • • • • • • Painted, solid steel profile frame with two lockable steering rollers and two fixed rollers. Proctective hood with safety switch integrated in the machine Horizontal table board equipped with integrated winding plate and core segments which can be lowered Winding core pneumatically adjustable Winding core diameter continuously adjustable manual, with scale Automatic tapering of the core when lowering Ring height adjustable by a motor Pneumatic free lift of the winding counter plate Traversing slide...