Technische Anderungen vorbehalten. Stand 02/2018. Fig. 3 Spool winding axle Customer logo Measuring ID: 0001 Counter ID: 005500001 17.12.20 09:26:05 Length* 00006.905 m MOTROL® 800 This motor driven coil and spool winder enables to wind materials such as cables, tubes, hoses, steel cables, plastic profiles etc. onto coils or empty spools and to simultaneously carry out length measuring and cutting. Technical Details Coiler head / spool diameter Spool width (depending on type of spool winding axle) Spool weight (depending on type of spool winding axle) Winding material diameter (varying on conformity assessment) Winding drives selectable (depending on requirements) Electrical connection Traversing width Inlet height Pass-through direction Lenght x Width x Height Height with open protection cover Colour machine Weight machine (without packing) max. 800 mm max. 425 mm max. 100 kg 1-50 mm 95 rpm (1,5 kW) or 130 rpm (3,0 kW) 400 V / 50 Hz max. 400 mm approx. 1140 mm right to left approx. 2000 x 1000 x1400 mm approx. 2150 mm RAL 7005, mouse grey approx. 500 kg kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com

MOTROL® 800 Coil and spool winding machine Basic equipment: • Basic machine constructed as self-supported, torsionally resistant weldment with two lockable and two fixed steering rollers or four lockable steering rollers • Drive by means of AC-geared motor via chain • Speed control is continuously ajdustable, allowing a smooth starting • The winder is designed for winding heads, ring coiler heads or spool winding axles • Manually operated traversing slide designed for accessories such as length measuring units, cutting units and guide rollers • The control cabinet is installed in the machine...