MOTROL® 500 Coil- and Spoolwinder Dimensions and specifications may be changed without prior notice. Issue 10/2013. Fig. 2 Coil and spool dispensing unit RAPID 480 SL Fig. 3 Spool winding axle Fig. 4 Traversing with telescope rail MOTROL® 500 This motor driven coil and spool winder enables to wind materials such as cables, tubes, hoses, steel cables, plastic profiles etc. onto coils or empty spools and to simultaneously carry out length measuring and cutting. Technical Details Coiler head diameter Standard drives (special speed on request) Electrical connection Traversing width incl. winding head Traversing width incl. spool / drum Inlet hight pass-through direction Colour machine Weight machine (without accessoires) kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com

MOTROL® 500 Coil- and Spoolwinder Basic equipment: • Basic machine constructed as self-supported, torsionally resistant weldment with two lockable steering rollers and two fixed rollers. • Direction of travel right-angled to winding direction • Drive by means of AC-geared motor via chain • Speed control is continuously ajdustable, allowing a smooth starting • The winder is designed for winding heads, coiler heads or spool axles with 30 mm • Manually operated traversing slide designed for accessories such as length measuring units, cutting units and guide rollers • The control cabinet is installed...