MESSBOI 40 BELT Our belt measuring unit MESSBOI 40 is used for all various types of winding material such as cables, tubes, hoses and ropes in order to measure its length. It is suitable for highest possible error limit as well as for very small measuring tolerances. Chassis consits of a stainless steel housing, in which particularly the sensitive components are protected against external influences at best. Material scanning is executed by two measuring crawlers. The upper part can be removed by means of a toggle joint and adjusts itself to the material thickness due to its own weight. The material length is indicated by a rotary pulse encoder which is mounted at the lower measuring crawler. The actual length as well as its set value is indicated by an electric pre-selection counter. Conformity certification of the length measuring device with additional inlet and outlet rollers for coated round cables is approved by German Authorities for a period of two years,valid in Europe. Technical Details Material-0 Calibration Measuring wheel Error limit with additional inlet and outlet roller cages Length without calibration accessories Width Height Length with calibration accessories Height with tripod stand Speed Speed calibration approval Recommended equipment + / - 0,5 % Tripod stand for installing the MESSBOI 40 Belt on the floor abt. 500 mm Pedestal for installing the MESSBOI 40 Belt on a desk abt. 500 mm Stainless steel housing abt. 1400 mm Pneumatic locking device for locking the measuring wheel adjustable 1320 - 1620 mm Other accessories upon request max. 600 m/min max. 200 m/min Dimensions and specifications may be changed without prior notice. Issue 10/2013. kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com