Measuring unit for winding goods up to an outer diameter of 40 mm with mechanical or digital counter. Depending on the application we offer various versions to customer specification. These measuring units consist of a solid carcass equipped with guide rollers to which the measuring device is mounted. Measuring scanning by means of measuring wheel. Calibration approval for sheathed round cables with additional inlet and outlet. If requested, also available with stainless steel-counter roller for the measuring of steel ropes. Conformity certification of the length measuring device with additional inlet and outlet rollers for coated round cables is approved by German Authorities for a period of two years,valid in Europe. MESSBOI 40 BVE Part No. 85100455 with 2 potential free contacts for prestop and shut-off mechanism Winding good-0 1-40 mm L x W x H (without roller cages) abt. 320 x 200 x 280 mm Measuring wheel circuit 0,5 m Repeat error limit accuracy class of accuracy III + / - 0,5 % with roller cages Speed max. 350 m /min Speed as per calibration approval max. 200 m /min 40 mm 35 mm steel, zinc plated stainless steel 9 kg / pair for direct winding out from pay off Material thickness Roller-0 Housing Guiding rollers Weight Dimensions and specifications may be changed without prior notice. Issue 10/2013. In- and Outlet roller cages 0 3 5 mm / 0 80 mm Part No. 85100186 (Combination) for direct winding out of the storage rack Material thickness Roller-0 Inlet Roller-0 Inlet Roller-0 Outlet Housing Weight 40 mm bottom 35 mm (stainless steel) top side 80 mm (plastic) bottom/top side 35 mm (stainless steel) steel, zinc plated 9 kg / pair kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com