LAGROL Drum rack and unwinding system Based on your individual demand Fig.1 LAGROL drum rack with MOTROL 800 EASY coil and spool winding machine Drum rack and unwinding system Functionality: The LAGROL drum rack segments consist of two frames each of appropriate height, the necessary cross connectors for the respective segment load as well as of the axle holding fixtures and the axles for the drums. For each further segment only an additional frame is required and the corresponding number of cross connectors, axle holding fixtures and axles. The system is suitable for manual and motorized winding. This drum rack and unwinding system is ideal for the use in a production line along with the motorized take-ups such as UMROL, MOTROL or AUTOCUT. The solid construction with special and patened axle and / or drum holders and the fact that winders and storage system are well-suited to each other make this system ideal for the above mentioned range of application. Variable equipping possibilities Customer-specific system High stability High surface protection (powder coated) Perfect addition to winders Suitable for motori

LAGROL Drum rack and unwinding system Fig.2 LAGROL axle holder Fig. 2 LAGROL drum rack with TROMPLAT transport and loading tool for drums Also suitable for motorized winding Store and wind winding materials comfortable - The perfect combination • MOTROL 800 EASY coil and spool winding machine The MOTROL 800 Easy is the entry-level model in the machine sector. This motorized ring and drum winding machine is designed for winding coilable material such as cables, pipes, hoses, steel ropes, plastic profiles etc. either as rings or on spools and drums. With the appropriate components such as length...

Part No. Frame with depth 1100 mm Field width / crossbar width Drum width with 080mm bore & 034mm axle Frame height Required crossbars Load capacity

Frame accessoryPart No. Accessory 85300225 Floor anchors (4 pcs. per frame) 85300226 Composite anchors (2 - 4 pcs. per frame) Axle holders / shellsPart No. Pair of axle holders excl. brake pads 85300135 LAGROL 1100 mm depth, 2000 kg incl. retaining tubes - 5 holding pos. Incl. one set of axle shell pairs Part No. Pair of axle shells excl. brake pads 85300104 LAGROL pair of axle shells without retaining tubes excl. brake pads Brake pads for axle holders / shells Part No. Brake pads for axle holders / shells 85300113 Brake pads (1 left,1 right) when using drum axle 0 60mm Drum axle incl. 2 centering...

LAGROL Drum rack and unwinding system Cable trailing system for LAGROL Fig. 16 Cable trailing system for rack mounting Cable trailing system with flat cable for rack mounting / ceiling mounting 230V/400V / 16A Functionality: The components of the cable trailing system are made of galvanized steel. The ball-bearing rollers assure smooth and trouble-free running in a special profile rail. The cables are gently clamped by neoprene rubber plates. A specially shaped pressure-reducing piece prevents the cable from getting kinked at the clamping point. The system is mounted on the associated carrying...