AUTOCUT 40 Cut-to-length machine for cables, pipes and hoses Fig. 1 AUTOCUT 40 with closed protection cover Dimensions and specifications may be changed without prior notice. Issue 10/2013. Fig. 2 Installation with a calibratable length measuring device, belt feed and pneumatic cable cutter Fig. 3 Coiler pin with adjustable drive motor Fig. 4 Control desk with touchpanel and controlled positioning servo drive AUTOCUT 40 This motorised length cutting machine is suitable for measuring and cutting to length materials such as cables, pipes, hoses, steel ropes, plastic profiles etc. The powerful feed allows the draw-off directly from an unwinding system without motor such as drum rack or drum unwinder. In connection with a coil pin the cut-off materials are coiled in rings. Technical Details Winding material diameter Inlet hight pass-through direction Height with open protection cover Length with pot winder Weight (without accessories) kabelmat® Wickeltechnik GmbH Steinbuckelweg 25 | 72293 Glatten Telefon 07443 9670-0 | Fax 07443 9670-39 [email protected] | www.kabelmat.com

AUTOCUT 40 Cut-to-length machine for cables, pipes and hoses Basic equipment: • Basic machine constructed as self-supported, torsionally resistant weldment with two lockable and two fixed steering rollers or four lockable steering rollers • Speed control is continuously ajdustable, allowing a smooth starting • The control cabinet is installed in the machine frame • The control panel with emergency stop button is ergonomically integrated in the base frame • Protection cover with window to be hinged upwards (required for CE) • CE conformity declaration according to machinery directive 2006/42/EG...