*mydirectindustry

TCR 510 • 510B

Product catalog summary

Standard Configuration: The machine comes equipped with features such as rigid tapping, RS-232 port, automatic power off, lubrication, tool cylinder, air valve, coolant system, 3-axis way cover, work light, three-color warning light, heat exchanger for electric cabinet, full guarding, leveling pads and bolts, tool kit, and operation manual.

Optional Configuration: Options include a faster spindle motor (24,000 rpm), coolant through spindle (70 bar/1,000 psi), ATC with 32 tools, chip conveyor, tool and workpiece measurement, and a 4th axis.

Specifications: The TCR 510 and TCR 510B models have a 20” X-travel. Axis travel for X/Y/Z is 510/406/303 mm (20/16/12”). The spindle-table distance ranges from 170–500 mm (7–19.7”), and the spindle-column distance is 460 mm (18”). The table dimensions are 650x400 mm (25.6x15.7”), with a maximum table load of 300 kg (660 lbs).

Spindle: The spindle speed is 12,000 rpm, with optional speeds of 20,000/24,000 rpm. The spindle taper is BT 30, with direct or built-in transmission types.

Feed Rate: Rapid feed rates for X/Y/Z are 48/48/60 m/min (1890/1890/2360”/min), and cutting feed rates range from 1–12 m/min (39.4–472”).

ATC (Automatic Tool Changer): The TCR 510 has 14 tools (servo) and the TCR 510B has 20 tools. Maximum tool diameter is Ø80 mm (3.15”), maximum tool length is 200 mm (7.8”), and maximum tool weight is 25 kg (55 lbs) for full and 3 kg (6.6 lbs) for single tools. Tool change times are 1.6 seconds (T-T) and 2.5 seconds (C-C).

Control: The CNC controller is Mitsubishi M70.

Motor: The main spindle motor is 2.2/3.7 kW (5 Hp) for TCR 510 and 4.6 kW (6 Hp) for TCR 510B. The rapid traverse motor is 1.5/1.5/3 kW (2/2/4 Hp) with brake.

Dimensions: The machine dimensions are 1600x2150x2320 mm (63x85x91”), and the weight is 2600 kg (5,720 lbs).

Catalog excerpts

Tapping Center Standard configuration ✓ Rigid tapping ✓ RS-232 Port ✓ Automatic power off ✓ Automatic lubrication ✓ Tool cylinder ✓ Air valve ✓ Coolant system ✓ 3-axis way cover ✓ Work light ✓ Three-color warning light ✓ Heat exchanger for electric cabinet ✓ Full guarding ✓ Leveling pads and bolts ✓ Tool kit ✓ Operation manual Optional configuration ■ Faster spindle motor, 24,000 rpm ■ Coolant through spindle, 70 bar (1,000 psi) ■ ATC 32 tools ■ Chip conveyor ■ Tool and workpiece measurement ■ 4th axis *The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Open the catalog to page 1

All KAAST Machine Tools Inc. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list