Technical Bulletin IN-PROCESS DEBURRING OF CROSS-DRILLED HOLES MADE EASY WITH The NEXT TOOL AFTER DRILL is the only deburring tool capable of in-process deburring of cross-drilled holes. The tool is used just like any cutting tool found on a lathe or tool magazine of a milling machine. It removes burrs specifically from the intersection of the holes. The operation can be tailored to leave a minimally broken edge or a blended radius. Before BENEFITS - Consistent results and consistent quality - Increased throughput / shorter cycle time - Reduced deburring cost 50% - No setup for secondary deburring operations - No batch and queue - Ideal for controlled process environment For Immediate Assistance or to place an order: Call (888) 535-3663 • (510) 784-0667 Fax (510) 732-6078 [email protected] www.jwdone.com ORBITOOL is a Registered trademark of J.W.Done Corp. US and Foreign Patents.

One-Hemisphere Configuration Available Sizes Complete Flexible Nominal Tool P/N Holder P/N I S =CD=C| 0 A m in (approx ) varies with angle of intersection Two-Hemisphere Configuration Available Sizes Complete Flexible Nominal Tool P/N Holder P/N I S 0 A m in (approx ) varies with angle of intersection ""90 60 45"" .079 Please contact us for specific application assistance ORBITOOL is a Registered trademark of J.W.Done Corp. US and Foreign Patents.