Power Supplies PSU44-1000-01 PSU80-1000-01 and 02. units are equipped with thermal protection that automatically switches the unit off if the temperature becomes too high. A wide programme of compact and robust industrial power supplies for motor controllers that do not have their own power supply, or as a supplement to a built-in power supply in order to fulfil special requirements. Also an economic solution where several motor controllers can use the same supply. • 40V, 80V and 150V versions • 1000W continous • 3000W peak • Very high efficiency •Allow short-duration loads higher than 200% These 1000W Power Supplies can be delivered with voltages of 44, 80 and 150 Volts DC. Both Power Supplies can be loaded with more than 200% over-current for short durations, as is often required during acceleration of motors In order to protect against longer duration overload, the • Equipped with thermal pro tection • Can be mounted inside con trol cabinets • 230 VAC and 115 VAC supply • Fuse in AC input and 4 fuses at DC outputs • Simple and robust construction

Power Supplies PSU44-1000-01/02 and PSU80-1000-01 Dimensions 100 Specifications Output Voltage* Output Current Load cont. Load short duration Fuse Fuse Weight Output 1-4 Output 1-4 Out 1-4 Out 1-4 Primary Secondary kg W W A VDC PSU44-1000-01 4x44 6 1000 3000 4x T10A T10A@115V PSU44-1000-02 4x44 6 1000 3000 T6.3A@230V PSU80-1000-01 4x80 6 1000 3000 4x6.3A * Unloaded: 44.7VDC at 230VAC. 49.6VDC at 254VAC Loaded with 4 Ohms on both voltage outputs: 38.8VDC (376W) at 230VAC. 42.6VDC (453W) at 254VAC. Application with JVL units JVL Comtrollers/ Drivers, Modules MAC50-141, SMC35x SMC23,24,25,26 SMC20...