Catalogs >
JVL A/S >
ld044gb

ld044gb
4Pages

Catalog excerpts

Power supply kits for motor These power supplies can be used in applications when there is insufficient space for a standard power supply or a more cost-effective solution is power supplies. • Flexibility in mounting (loose • Built-in TCO thermo switch, • Compact and easy to mount • High peak current ideal for motor controllers with fast • Transformer design in accord- standard power supply series The PSUKIT consists of a trans- former, a capacitor and a bridge • Modules with built-in power dump circuit and resistor

Open the catalog to page 1

All kits contain transformer with connector to diode bridge, transformer screw, capacitor, bridge with 4 diodes, 2-wire with connector to diode bridge. Note 1: A 1W resistor, R, is recommended to discharge the capacitor at power off, and to ensure that the voltage does not increase at "no load" applications. Mains supply connections for 115VAC and 230VAC -Thermal switch Thermal switch Transformer AC output connections • Connect 230VAC to yellow and orange. Short circuit brown/red. • Connect AC output from transformer. Red and Red wire to the 2 AC inputs on diode bridge. • Connect + on the...

Open the catalog to page 2

Product Data and power dump resistor con- sists of a rectifier, a capacitor voltage nevertheless increases to more than about 50VDC, the energy will be dissipated in a built in power dump resistor. with a maximum voltage of gether with switchmode power supplies to absorb energy and keep a stable DC voltage regard- less of peak power consumption. Internal dump resistor: 10W cont. 40W peak PSU00-PD1 is not short circuit protected Activates PDO to discharge capacitor when AC supply is removed. Shows voltage between P+ and P- external power resistor can be connected to absorb decellera- tion...

Open the catalog to page 3