Display Modules DIS10, DIS11 and DIS12 DIS10, DIS11 and DIS12 comprise a series of intelligent 5½digit display modules which can be connected to JVL motor controllers equipped with register sets and a module interface (SMC23, SMC24 and SMC30). The Module is controlled by the Controller so that the Controller program can display numeric values on the Module display. Values of between 0 and 65535 can be displayed. The Display Module is available in the following 3 models: DIS10: Module without cabinet and front glass for fitting into own system panel. DIS11: 1 Module with cabinet and anti-reflection front glass. (72 x 36mm) DIS12: 2 Modules built into a common cabinet with antireflection front glass. (72 x 72mm) • High-intensity LED display • Connection of overall Con troller via built-in RS485 interface (galvanically isolated) using simple 2-core cable - enables long communication lines • Protected against voltage overload and incorrect polarity connection • Facility for connecting other types of Module to the system interface, including MultiCounter Module type CMO10, Input/Output Module IOM11 and Keyboard/Display Module type KDM10D/T • Up to 31 units can be con nected to the same interface bus • Non-critical power supply, 12-45 VDC • Facility for connecting several Controllers to the same Display Module, i.e. 1 display can show data from several Controllers LD0011-02GB Date: 4-1-05

Display Modules DIS10, DIS11 and DIS12 Display Front Panel Display Connections and Address The Display Modules use a 5½-digit high-intensity display with an additional unit in which the user can insert a film to show the measurement units. The display is mounted beneath an anti-reflection, toned glass which ensures readability over a very wide field of viewing. + and - Power Supply +12 - 45V Prefix and 1 Display for user-defined indication of units 5 digits from 1 to 9 The + and - terminals are optically isolated from the interface terminals A and B to achieve high noise immunity. The power supply...