Catalogs >
JVL A/S >
Integrated stepper motors with Profinet 3Nm - 12Nm

Integrated stepper motors with Profinet 3Nm - 12Nm
2Pages

Catalog excerpts

Integrated stepper motors with Profinet 3Nm - 12Nm - 1

Integrated stepper motors with Profinet PRESS release: Aug. 2015. Birkeroed, Denmark -- JVL has for several years been a leader in integrated servo and stepper motors. Now you can get all the benefits from the integrated stepper motors with Profinet Industrial Ethernet. JVL has launched a new series of integrated stepper motors with Profinet and programmable motion controller. All the necessary electronics in a stepper system is integrated in the motor. JVL has used the latest technology to achieve the incredibly high step resolution of 409,600 step / revolution, resulting in unsurpassed smoothness and silent running. The length is only 95 mm (3.74 "), and therefore it is the shortest in the world motor with built-in controller and Profinet. The motors are available in 4 sizes - MIS340 with 3,0 Nm, length 95 mm - MIS341 with 6,0 Nm, length 126 mm - MIS342 with 9,0 Nm, length 156 mm - MIS343 with 12,0 Nm, length 186 mm The motor contains everything needed to solve a modern control task, either alone as a stand-alone unit or controlled from a PLC or PC. The 8 I / O points can be individually configured as digital input, digital output or analog input. Profinet provides easy connectivity to PLC. MAC motor standard protocol makes it possible to connect up to 254 different MAC motors and QuickStep motors SMC75 and SMC85 controllers to be connected on the same RS485 bus.

Open the catalog to page 1

Integrated stepper motors with Profinet 3Nm - 12Nm - 2

Industrial Ethernet The new Ethernet protocols for integrated stepper motors now allows connectivity to all the new Ethernet bus systems that have come on the market such as EtherCAT, EtherNet /IP, Profinet, Powerlink, Modbus TCP and Sercos III. Technical details and benefits - Shortest length in the world: only 95 mm for 3 Nm - Extreme resolution of 409,600 steps / rev (ie 4,096 micro-steps per full step) - Speed-precision 0.01 RPM. Accelleration-precision 1 RPM / sec. - Built-in PLC with 8 I / O: each point DI or DO 24V or 0-5V (12bit) analog input with advanced filtering - RS485 up to...

Open the catalog to page 2