DATASHEET Compact EX2200-C Ethernet Switch Fanless L2/L3 Switches for Micro Branch, Retail, and Workgroup Deployments Product Overview The Juniper Networks Compact EX2200-C Ethernet Switch offers an economical, entry level, simply connected solution in a compact, fanless form factor for access layer deployments in micro-branches, retail, and workgroup environments. The EX2200 also supports Juniper Networks Virtual Chassis technology, allowing up to four interconnected switches to be managed as a single logical device, delivering a scalable, pay-as-you-grow solution for expanding networks. Product Description The Juniper Networks® EX2200-C Ethernet Switch with Virtual Chassis technology delivers a compact, silent, and power efficient platform for low-density micro branch deployments and commercial access or enterprise workgroup environments outside the wiring closet. Featuring 12 10/100/1000BASE-T access ports with and without Power over Ethernet Plus (PoE+) in a fanless design, the EX2200-C switches deliver a powerful solution for supporting services such as unified communications, IP telephony, closed circuit television (CCTV), and other applications in office, classroom, hospitality, and other space and wiring constrained environments. Two front panel, dual-purpose (10/100/1000BASE-T or 100/1000BASE-X) uplinks provide operational flexibility. Architecture and Key Components The fixed configuration EX2200 line of Ethernet switches delivers complete Layer 2 and basic Layer 3 switching capabilities to satisfy the low-density branch and low-density wiring closet connectivity requirements of today’s high-performance businesses. The EX2200-C models extend that reach into workgroup environments that reside outside the wiring closet, including micro branch offices, retail access applications, education, hospitality, and other locations where the switch is deployed in open areas. Two models are available. The EX2200-C-12T-2G offers 12 front panel 10/100/1000BASE-T ports for connecting to networked devices. The EX2200-C-12P-2G includes support for the IEEE 802.3at PoE+ standard for powering networked devices such as telephones, video cameras, multiple radio IEEE 802.11n wireless LAN (WLAN) access points, and video phones in converged network environments. The EX2200-C switches also include two front panel, small form-factor pluggable transceiver (SFP) GbE uplink ports, and two RJ-45 copper GbE uplink ports. Up to two of the uplink ports can be used simultaneously, providing the flexibility to connect to higher layer devices such as aggregation switches or routers over unshielded twisted pair (UTP) or fiber optic cabling. The uplink ports can also be configured as Virtual Chassis interfaces and connected via standard GbE optics interfaces; the last two are preconfigured by default as Virtual Chassis ports. A fixed internal power supply ensures operational simplicity. 1

Hotel Room Casino Floor EX2200-C Workgroup (K-12 Education) EX2200-C Access Aggregation Classroom (Hospitality) (Gambling) (Enterprise) EX2200-C EX2200-C Dual FE/GbE uplinks (ber or copper) EX4200 EX4200 Figure 1: When deployed in a Virtual Chassis configuration, up to four EX2200-C switches can operate as a single, logical device. Virtual Chassis Technology The EX2200-C supports Juniper’s unique Virtual Chassis technology, enabling up to four interconnected EX2200-C switches to be managed as a single logical device and delivering a scalable, pay-as-you-grow solution for expanding network environments....

Features and Benefits Access Security The EX2200-C model switches include a number of features that make them ideal for low-density, open space deployments. The EX2200-C switches fully interoperate with Juniper Networks Unified Access Control, which consolidates all aspects of a user’s identity, device, and location, enabling administrators to enforce access control and security down to the individual port or user levels. Working as an enforcement point within the UAC, the EX2200-C provides standards-based 802.1X port-level access control as well as L2-L4 policy enforcement based on user identity,...

Junos Operating System Enhanced Limited Lifetime Warranty The EX2200-C switches run the same Junos OS that is used by other Juniper Networks EX Series Ethernet Switches, as well as Juniper routers and Juniper Networks SRX Series Services Gateways. By using a common operating system, Juniper delivers a consistent implementation and operation of control plane features across all products. The EX2200-C switches include an enhanced limited lifetime hardware warranty that provides next business day advance hardware replacement for as long as the original purchaser owns the product. The warranty includes...

Specifications (continued) Layer 2 Switching Supported RFCs3 • Maximum MAC addresses in hardware: 16,000 • RFC 3176 sFlow • Jumbo frames: 9,216 bytes • RFC 2925 MIB for remote ping, trace • Number of VLANs: 1,024 (VLAN IDs: 4,096) • RFC 1122 Host requirements • Port-based VLAN • RFC 768 UDP • MAC-based VLAN • RFC 791 IP • Voice VLAN • RFC 783 Trivial File Transfer Protocol (TFTP) • Private VLAN (PVLAN) • RFC 792 Internet Control Message Protocol (ICMP) • IEEE 802.1ak: Multiple VLAN Registration Protocol (MVRP) • RFC 793 TCP • Multicast VLAN Registration (MVR) • RFC 826 ARP • Compatible with Per-VLAN...

Specifications (continued) High Availability (continued) • LAG load sharing algorithm—Bridged Multicast Traffic: -- ­ P: S/D MAC, S/D IP I -- ­ CP/UDP: S/D MAC, S/D IP, S/D port T -- ­ on-IP: S/D MAC N • LAG sharing algorithm—Routed Multicast Traffic: -- ­ P: S/D IP I -- ­ CP/UDP: S/D IP, S/D port T • Tagged ports support in LAG • Uplink Failure Detection (UFD) Multicast • Internet Group Management Protocol (IGMP) snooping entries: 1,000 • IGMP: v1, v2, v3 • IGMP snooping • Protocol Independent Multicast-Sparse Mode (PIM-SM), PIM Source-Specific Multicast (PIM-SSM), PIM Dense Mode (PIM-DM) Quality...