1. Catalogs
  2. JUNG PUMPEN
  3. oxylift & oxyperl

oxylift & oxyperl

oxylift & oxyperl

oxylift & oxyperl

Product catalog summary
Overview: The document provides detailed information on Jung Pumpen's Oxyperl and Oxylift aerators and pumps, designed for small sewage treatment plants. These products enhance the treatment process by ensuring efficient oxygen supply and easy maintenance.
Specifications:
  • Oxyperl Aerators: Available in two power classes (270 watt and 560 watt) with maximum air flows of 8 m³/h and 16 m³/h respectively. They feature discharge connections of 1" and 1 ¼" female threads.
  • Oxylift Pumps: Feature a power input of 300 watt, a free passage of 15 mm, and are available with or without a float switch. They have a discharge connection of 1 ¼" female thread.
Key Features:
  • Both Oxyperl and Oxylift are designed for easy integration into existing systems with minimal effort.
  • The quick release cable inlet simplifies maintenance and eliminates the need for complex cable repairs.
  • Energy efficiency and high output are emphasized, with the ability to retrofit other manufacturers' systems.
  • Oxylift pumps offer a large passage to reduce blockage risks.
Advantages:
  • Time and cost savings due to the quick release cable inlet.
  • Safe to run dry and available in different cable lengths.
  • Neutral design and made in Germany, ensuring quality and reliability.
Conclusion: Jung Pumpen's Oxyperl and Oxylift products are innovative solutions for small sewage treatment plants, offering enhanced performance, ease of maintenance, and compatibility with existing systems.
See more

Catalog excerpts

oxylift & oxyperl-1

jung pumpen oxylift & oxyperl Flow Management Solutions

 Open the catalog to page 1
oxylift & oxyperl-2

jung pumpen  oxyperl Submersible aerators with power Oxygen accelerates the treatment process Even the smallest organisms must be fed. In the fully biological small sewage treatment plant it is the micro organisms which break down the pollutants in the sewage. In order to do this they require an adequate supply of oxygen. The submersible aerators of the oxyperl range are especially powerful units for mixing and aeration of sewage in the activated sludge process. In modern small sewage treatment plants the SBR (sequenting batch reactor) with submerged aerators are state of the art. The flow inducing...

 Open the catalog to page 2
oxylift & oxyperl-3

jung pumpen  oxyLIFT Ready to connect Attractiv and powerful! Up to now most small sewage treatment plants are operated with drainage or sump pumps. other manufacturers with better quality pumping products with minimal efforts. JUNG PUMPEN has now for the first time reacted to the practical requirements of this process and developed a pump especially suited for use in small sewage treatment plants. oxylift is the first waste water pump in which the cable connector can be easily released with a few hand turns. This is real quality of service – a clean and reliable electrical cable connection without...

 Open the catalog to page 3
oxylift & oxyperl-4

jung pumpen  oxyperl und oxyLIFT All the advantages at a glance The quick release cable inlet connector ▶▶ Specially developed for small sewage treatment plants ▶▶ Time and cost saving thanks to quick release cable inlet ▶▶ Energy efficient and high output ▶▶ Easy replacement of other pumps common in the market ▶▶ Safe to run dry ▶▶ Different cable lengths available ▶▶ Neutral Design ▶▶ Made in Germany JUNG PUMPEN GmbH Industriestraße 4 – 6 · 33803 Steinhagen Telefon 05204 170 · Fax 05204 80 368 [email protected] · www.jung-pumpen.de JUNG PUMPEN Perfektastraße 61/3 · 1230 Wien Telefon 01 7280262...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.