Guide rail adapter Pentair Water Pump replacement - no problem! Adapter for guide rail systems of other pump manufacturers

Lowering the pump into the sump Guide rail systems are used where submersible pumps are installed in stationary applications. Thanks to the easy location of the pump by means of the guide rail system it is not necessary to enter the sump. The pump slides down the guide rails into the sump and connects automatically to the discharge pipe. Maintenance and pump replacement is carried out by raising the pump along the guide rails out of the sump by means of a lifting chain. The replacement of another manufacturer's pump by a reliable waste water pump from Jung Pumpen used to involve considerable...

Technical Data MultiCut pump MultiFree / MultiStream The following guide rail adapters are currently available as standard The JUNG PUMPEN pumps with vortex and single-channel type impellers are supplied with the following hole circle diameters. Nominal Manufacturer Can be combined with MultiCut Hole circle Bolt size Flygt Compit Jung Pumpen This means that the connection to a competitor's guide rail system can often be carried out without the need to buy an adapter. There are however some exceptions to this. Special versions All waste water pumps of the MultiFree and MultiStream series have...

If there are a number of holes please indicate pattern of holes Checklist Know what it is all about If no ready-made adapter is available (as per previous page) then we can make a suitable adapter for your current guide rail system. Please complete the check list below as much as possible and fax it to the fax number listed on the right hand side of this leaflet. Please also include your full address to allow us to contact you. Headline Data Subhead Make/Manufacturer Pump type /Designation Subhead Discharge connection Fließtext DN/PN Code-No. Performance: Head Hmax= Flow Qmax= Single pump installation...