1. Catalogs
  2. JUNG PUMPEN
  3. Flushing pipe

Flushing pipe

Flushing pipe

Flushing pipe

Product catalog summary
Overview: The document discusses the cleaning and odour prevention system for pump sumps using a flushing pipe designed by JUNG PUMPEN. This system is intended to maintain cleanliness and prevent odour formation in pump sumps by using a continuous stream of flushing water.
Flushing Pipe Specifications: The flushing pipe is constructed from stainless steel and is attached to the vent opening of the pump. It activates when the pump starts, providing a continuous stream of water that prevents the formation of floating crusts and deposits, while also introducing oxygen into the wastewater to prolong aerobic conditions.
Installation and Compatibility: The flushing pipe can be installed in both concrete and synthetic sumps, compatible with MultiCut, MultiFree, and MultiStream systems. Installation involves replacing the vent screw with the flushing pipe and fitting an intermediate flange for the MultiCut 08/2 M model.
Features and Benefits: The system is maintenance-free, blockage-free, cost-effective, and easy to install, even for retrofitting. It ensures continuous venting of the pump with minimal output loss (approximately 5%) and does not require additional control devices.
Contact Information: JUNG PUMPEN GmbH, Industriestraße 4–6, 33803 Steinhagen, Germany. Phone: +49 52 04 170, Fax: +49 52 04 80 368, Email: [email protected], Website: www.jung-pumpen.de
See more

Catalog excerpts

Flushing pipe-1

Flushing pipe Flushed clean Cleaning and odour prevention in the pump sump

 Open the catalog to page 1
Flushing pipe-2

The flushing pipe is made of stainless steel and is fitted to the vent opening of JUNG PUMPEN. As soon as the level control gives the signal to the pump to start up, the flushing pipe provides a continuous stream of flushing water onto the liquid surface. By this means the formation of a floating crust is prevented and deposits cannot form. In addition, due to the turbulence created, oxygen is added to the waste water. This extends by a significant factor the duration of aerobic conditions. Flushing type (type I M) for MultiCut 08/2 M and standard flushing pipe (on the right) Simply flush and...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.