JUMO TYA 201 Single phase thyristor power controller
21Pages

JUMOGmbH&Co. KG Deliveryaddress: Mackenrodtstrafte 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Email: mail@jumo.net Internet: www.jumo.net JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. 6733 Myers Road East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com (JUMP) Data sheet 709061 Page 1/21 JUMO TYA 201 Single-Phase Thyristor Power Controller For controlling resistive/inductive loads The JUMO TYA 201 represents a consistent further development of the JUMO power controller technology. The micro-processor controlled power controller displays all parameters in a backlighted LCD display and is operated using the 4 keys on the front. Thyristor power controllers are employed where larger resistive and inductive loads have to be switched, e.g. in industrial kiln construction and in plastics processing. The Thyristor power controller comprises two Thyristors connected in anti-parallel, the insulated cooling body and the control electronics. Thyristor power controllers up to a load current of 32 A can either be clipped onto a 35 mm mounting rail or fitted to the wall with a mounting plate. Units with a load current greater than 32A have to be fitted to the wall. Depending on their configuration via the setup program, the Thyristor power controllers operate with phase-angle control, in burst-firing mode or in half-wave operation. In burst-firing mode, the phase angle can be cut back for the first half-cycle, for driving transformer loads. Available subordinate controls are U, U2, I, I2 and P control. Use of a subordinate control ensures that fluctuations in the supply voltage do not affect the control loop during the control process. It is possible to preset a base load and a max. output level. During a soft start, the default phase angle of the controller is reached slowly, starting at 180 degrees, in order to avoid high starting or inrush currents. The Thyristor power controllers comply with the operating conditions according to DIN EN 50178. Grounding is required in conformity with the regulations of the responsible electrical utility company. Block diagram Setpoint, analog inputs Standard signals: 0(2) to 10V, 0(1) to 5V orSSR Standard signal: 0(4) to 20mA Binary inputs Firing pulse (inhibit) via floating contact Interfaces I PROFINET, PROFIBUS DP, ! RS422/485 or Systembus ! JUMO mTRON T (EtherCAT) USB interface for setup program Binary input 1 freely configurable LC-Display with white backlighting Binary input 2 freely configurable Load output Subordinate control loop | U,U2 standard or ; 1,12 (can be set to U, U2) ; P (can be set to I, I2 or U, U2) | Power supply Actual value output - standard signals Binary output optional as relay (fault signal output) or optocoupler (fault signal output) or energy counter Approvals/approval marks (see "Technical data") c(^l)us LISTED Special features ■ Phase angle control and burst-firing mode ■ Half-wave operation for vibrators ■ LCD display with info line ■ Simple configuration of the device via clear text display in the operator's language ■ Setup program for configuration via USB interface ■ Transmission of the setup data is also possible without voltage supply to the unit (supply via USB port) ■ Close installation is possible ■ Mains load optimization through dual energy management ■ RS422/485 interface or ■ PROFINET, PROFIBUS DP for connection to process control systems ■ Systembus JUMO mTRON T or EtherCAT ■ Current limiting function ■ Soft start function ■ Resistance monitoring and limitation for MoSi2 heating elements ■ All versions in protection rating IP20 ■ Load monitoring for the detection of partial load failure or load short circuit "teach-in" ■ Integrated diagnosis systems ■ Energy counter ■ UL 508 Approval

JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. 6733 Myers Road East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com JUMOGmbH&Co. KG Deliveryaddress: Mackenrodtstrafte 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Email: mail@jumo.net Internet: www.jumo.net Data sheet 709061 Page 2/21

JUMOGmbH&Co.KG JUMO Instrument Co. Ltd. JUMO Process Control, Inc. Deliveryaddress: Mackenrodtstrafte14 JUMO House 6733 Myers Road 36039 Fulda, Germany Temple Bank, Riverway East Syracuse, NY 13057, USA Postaladdress: 36035 Fulda, Germany Harlow, Essex, CM20 2DY, UK Phone: +1 315 437 5866 Weight approx. 1.1 kg approx. 2.1 kg approx. 2.7 kg approx. 3.8 kg approx. 8.5 kg approx. 9.5 kg approx. 10.2 kg

JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. 6733 Myers Road East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com JUMOGmbH&Co. KG Deliveryaddress: Mackenrodtstrafte 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Email: mail@jumo.net Internet: www.jumo.net Data sheet 709061 Page 4/21 All specifications refer to the controller nominal data. Analog...

JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex, CM20 2DY, UK Phone: +44 1279 63 55 33 Fax: +44 1279 62 50 29 Email: sales@jumo.co.uk Internet: www.jumo.co.uk JUMO Process Control, Inc. 6733 Myers Road East Syracuse, NY 13057, USA Phone: +1 315 437 5866 Fax: +1 315 437 5860 Email: info.us@jumo.net Internet: www.jumousa.com JUMOGmbH&Co. KG Deliveryaddress: Mackenrodtstrafte 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Email: mail@jumo.net Internet: www.jumo.net Data sheet 709061 Page 5/21 USB Interface )-Analog input 0(2) tolOV, 0to5V> or SSR ib...