Technical Specifications Overview

This document provides detailed technical specifications and operational parameters for a certain electronic or electrical component/system.

Operating Temperature

• Range: -70 to 260 °C
• Standard Reference: IEC60172

Maximum Voltage

• Value: 5 KV
• Standard Reference: IEC60851

Flame Retardant Rating

• Rating: HL3
• Standard Reference: EN45545-45

Conductor Type

• Single conductor

Material

• PEEK - UL1446 certified

Outer Diameter

• 0.075 mm

Temperature Tolerance and Performance

• Temperature tolerance in °C
• Resistance change performance
• Impedance characteristics

Performance Parameters

• Baseline operational performance: 25 units (likely °C or mm)
• Optimal performance: 100 units + 2%
• Non-performance degradation on 150 units + 5%
• Middle degradation on 200 units + 8%
• Acceptable performance on 260 units + 15%

Limits and Thresholds

• Threshold temperature or parameter limits are specified but exact values are partially obscured.

Insulation Strength

• Measured in volts/millimeters (V/mil)
• Overall diameter and nominal resistance values are provided with precise measurements (e.g., 0.0381 mm minimum thickness, 0.0762 mm maximum thickness)

Application Areas

• Applicable for use in areas requiring high temperature resistance and flame retardancy.
• Suitable for electrical insulation and conductor applications.

Additional Notes

• Includes references to chemical, physical, and electrical properties such as dielectric strength, chemical resistance, oil and gas exposure, and exploration environments.
• Mentions systems, military equipment, and industrial functions indicating broad application scope.

Critical Information: The component/system must comply with IEC and EN standards for temperature, voltage, and flame retardancy. Material selection (PEEK) and conductor type (single) are key design parameters. Performance tolerances and degradation limits are quantified to ensure reliability under specified conditions.