Catalogs >
Juki Industrial Sewing Machine >
SC-920C/M92/CP-18A,CP-180A

SC-920C/M92/CP-18A,CP-180A
2Pages

Catalog excerpts

Control Box / Servomotor / Operation Panel The new model control box, which energy-saving The new model control box SC-920C has been newly developed. The control box is resistant to voltage fluctuations, noise and vibration. The new model control box is provided with an energy-saving mode for the first time in a control It reduces power consumption during standby time when the motor is not rotating by approximately In addition,M92 is the latest compact servomotor with the latest energy-saving technologies. Comparison of power consumption of DDL-8700-7 between when it is used with the SC-920C/M92 and when used with other control boxes. Power consumption-* (Electronic-stop motor) ♦When the sewing machine availability factor is 25%. *When the DDL-8700-7/SC-920C/M92 runs under the energy-saving mode.

Open the catalog to page 1

Two different operation panels, the CP-18A and CP-180A are applicable to the SC-920C/M92. Select the operation panel to be used, either the CP-18A or the CP-180A. (The sewing machine will not operate unless the operation panel is installed.) The main functions of the respective operation panels are as shown in the table. Function comparison table between CP-18A and CP-180A The CP-180A is recommended for sewing difficult-to-sew materials, hard-to-sew parts or for processes in which lots of setup changes are required. With the CP-180A, in addition to the functions of the CP-18A, the speed of...

Open the catalog to page 2

SC-920C/M92/CP-18A,CP-180A 2Pages

Catalog excerpts

All Juki Industrial Sewing Machine catalogs and technical brochures

SC-920C/M92/CP-18A,CP-180A
2Pages