MO-6900S Series
8Pages

■ SPECIFICATIONS Model name Safety stitching Stitch type Stitch length Differential feed ratio Super-high-speed, Overlock / Safety Stitch Machine Inclination angle of the needle Upper/lower bushing method DC×27(excluding some subclass model) Max. lift of the presser foot 7mm(excluding some subclass model) Max. presser foot pressure Stitch adjusting method Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard (excluding MO-6945S) Needle thread heat remover Provided as standard (excluding MO-6945S) ✽ “sti/min”stands for “Stitches per Minute.” MO-6914S Juki Corporation operates an environmental management system to promote and conduct the following as the company engages in the research, development, design, sales, distribution, and maintenance of industrial sewing machines, household sewing machines, industrial robots, etc., and in the provision of sales and maintenance services for data entry systems: ➀The development of products and engineering processes that are safe to the environment ➁Green procurement and green purchasing ➂Energy conservation (reduction in carbon-dioxide emissions) ➃Resource saving (reduction of papers purchased, etc.) ➄Reduction and recycling of waste ➅Improvement of logistics efficiency (modal shift and improvement of packaging, packing, etc.) INDUSTRIAL SEWING MACHINE DIV. 2-11-1, TSURUMAKI, TAMA-SHI, TOKYO 206-8551, JAPAN PHONE : (81) 42-357-2254 FAX : (81) 42-357-2274 http://www.juki.com ✽ Specifications and appearance are subject to change without prior notice for improvement. ✽ Read the instruction manual before putting the machine into service to ensure safety. ✽ This catalogue prints with environment-friendly soy ink on recycle paper. MO-6900S Series High-quality machine with easier operation and increased reliab

■ WHEN YOU PLACE ORDERS Please note when placing orders, that the model name should be written as follows: Stitch type 1-needle overlock 1-needle overlock for blind hemming Type Standard 2-needle imitation safety stitch High-quality machine with easier operation and increased reliability. Tape attaching presser foot / Tape guide Tape attaching presser foot (for sewing sharp curves)/ Tape guide powerful overlock/safety stitch machine reliability and ease-of-use, while upgrading Swing-type gathering device (manual-lever operated / for overlock machine) Swing-type gathering device...

■ DEVISES AND ATTACHMENTS Model The machine ensures both beautiful and upgraded seam quality at higher speeds. Description One-touch type tape cutter For 110, 115, 220, 240V and chain-off thread trimming device For 220, 380, 415, 440V (electromagnetic type) Automatic tape cutter For semiFor 110, 115, 220, 240V + chain-off thread sunken type For 220, 380, 415, 440V trimming device (number-off-stitch For 110, 115, 220, 240V For fullycontrol and electrosunken type For 220, 380, 415, 440V magnetic type) Pneumatic flat cutter Pneumatic side cutter (for overlock machine) Combination table of...

■ SUBCLASS MACHINE LIST Seams Number of Stitch Number Number Needle Overedging of of gauge width (mm) feed dog length rows (mm) needles threads (mm) Bottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (sti/min) Remarks Seams Number of Stitch Number Number Needle Overedging of of gauge width (mm) feed dog length rows (mm) needles threads (mm) Bottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (sti/min) For runstitching in general fabric For runstitching in general fabric 7,500 Upper looper 7,500 extra high throw...

■ SUBCLASS MACHINE LIST Seams Number of Stitch Number Number Needle Overedging of of gauge width (mm) feed dog length rows (mm) needles threads (mm) Bottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (sti/min) Remarks Seams Number of Stitch Number Number Needle Overedging of of gauge width (mm) feed dog length rows (mm) needles threads (mm) Bottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (sti/min) For runstitching in general fabric For runstitching in general fabric 7,500 Upper looper 7,500 extra high throw...

Chain-off thread trimming device [Reference] Combination table of "chain-off thread suction device" and "auto-lifer" which correspond to "chain-off thread trimming device", Chain-off thread trimming device Chain-off thread suction device >J Blower-type chain-off thread suction device I MC-7AI — ' Blower-type chain-off thread suction device + cloth chips ■J Pneumatic chain-off thread suction device *The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. Model |_Part No.__Description__Feature...

Please note when placing orders, that the model name should be written as follows: ^Select a sewing speed that is lower than the machine head's maximum sewing speed by 500sti/min. To order, please contact your nearest JUKI distributor.

■ SPECIFICATIONS Model name Safety stitching Stitch type Stitch length Differential feed ratio Super-high-speed, Overlock / Safety Stitch Machine Inclination angle of the needle Upper/lower bushing method DC×27(excluding some subclass model) Max. lift of the presser foot 7mm(excluding some subclass model) Max. presser foot pressure Stitch adjusting method Differential-feed adjusting method By lever (with micro-adjustment) Weight of the machine head JUKI Machine Oil 18 (equivalent to ISO VG18) Needle cooler Provided as standard (excluding MO-6945S) Needle thread heat remover Provided as...