LZ-2290A-SR-7
6Pages

Catalog excerpts

LZ-2290A-SR-7 Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine with Automatic Thread Trimmer (quick reverse type) Quick reverse type LZ-2290A-SR-7 Newly developed feed mechanism

Open the catalog to page 1

The machine is built around the newly developed LZ-2290A-7 machine head. In addition to the conventional types of stitching, the machine is able to perform T-shape stitching and zigzag pattern stitching to broaden its range of applications. ■The machine is able to perform a variety of pattern stitching types. • In addition to the conventional eight types and 14 patterns of zigzag stitching, the machine is able to perform T-shape stitching and covering stitching. As a result, the machine is equipped as standard with a 14-type and 20-pattern sewing capability. Furthermore, the machine is able...

Open the catalog to page 2

•The feed mechanism is controlled with a stepping motor to enable continuous sewing at a high speed. The machine achieves the world's highest sewing speed of 4,000rpm even when performing pattern sewing, including T-shape stitching and condensation stitching, dramatically increasing productivity. In addition, the machine retains stitching shapes with consistency (the maximum sewing speed differs depending on the sewing condition). ■Shape-tacking patterns can be changed with ease. •The zigzag width and feed amount are stored on a stitch-shape basis. It is therefore not necessary, after...

Open the catalog to page 3

Max zigzag width / Max feed pitch Throat plate Feed dog Presser foot (with finger guard) 10047017 H- With a recess on the reverse side of the presser foot /l/l/l/l Max. feed amount: 2mm Light-in-weight type 22560765 with the front fulcrum Light-in-weight type 23503253 Front fulcrum type Using two trimming knives. CB type: at the time of delivery \o) Threed cutter knife Presser foot with a tape guide

Open the catalog to page 4

Max zigzag width / Max feed pitch Throat plate Presser foot (with finger guard) Light-in-weight type Max. feed amount: 2.5mm Light-in-weight type with the front fulcrum Light-in-weight type Light-in-weight type Presser foot with a knife Max. feed amount: 2.5mm Using one trimming knife. Threed cutter knife Light-in-weight type Light-in-weight type Light-in-weight type with the front fulcrum Light-in-weight type Two different part numbers are assigned to one presser foot ( ex. 22547962 and 22547970), if you place a order for 22547962 ( left number ), factory supplies you presser foot...

Open the catalog to page 5

Model name *1 The maximum sewing speed is factory-set to 4,000 sti/min at the time of shipping (depending on the region to which the machine is to be shipped). *2 The maximum sewing speed of the machine varies depending on the zigzag width and feed amount settings. •Since the speed is controlled with the zigzag width and feed amount per stitch, it is thus limited by the zigzag width and feed amount settings for a sewing pattern. •The sewing speed should be appropriately set according to the sewing product and process. *3 The maximum zigzag width has been factory-limited to 8 mm, at the time...

Open the catalog to page 6

LZ-2290A-SR-7 6Pages

Catalog excerpts

All Juki Industrial Sewing Machine catalogs and technical brochures

LZ-2290A-SR-7
6Pages