■JUKI cc# JUKI ECO PRODUCTS The sewing machine produces soft seams with consistency with a low tension applied to the thread even when it runs at a high speed. High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine LZ-2280N Series

• LZ-2282N / LZ-2282N-7 Productivity is dramatically increased The machine incorporates a built-in lower knife that trims only the lower material. This allows the machine to simultaneously attach lace to the body of the foundation and trim only the body during processes to attach lace to the bottoms or tops of slips or to the joint seam lines of shorts. The machine demonstrates consistent trimming performance The knife is driven by a motor that runs independently from the sewing machine motor. With this feature, the knife can continue to run at a high speeds during trimming even when the speed...

Please note when placing orders, that the model name should be written as follows: • LZ-2280N series (without automatic thread trimmer) Machine head • LZ-2280N-7 series (with automatic thread trimmer) Machine head Power supply Code Operation panel Machine head LZ2284C70XD Wiper and automatic reverse feed function Power supply Code M51N O Operation panel CP18A CP180A JUKI JUKI CORPORATION SEWING MACHINERY BUSINESS UNIT ❖ Specifications and appearance are subject to change without prior notice for improvement. ❖ Read the instruction manual before putting the machine into service to ensure...

Soft seams can be produced by lowering the bobbin thread tension. Pedal-operated reverse feed stitching device (RF-1) The device enables the operator to perform reverse feed stitching using the pedal without using the right hand. Parts for sewing with thick thread (recommended needle: DPx5 #21, 134SUK Nm130) 225-56054 Knife unit D1440-583-H00 Needle thread guide 400-17095 Thread tension disk (asm.) All* Presser foot connecting components The aforementioned parts are used when a lockstitching type presser foot is installed on the machine. Select a parts set of either the presser-bar changing...