Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and Automatic Thread Trimmer Based on the market-proven design of the LU-2210N-7 and -2260N-7 Series, the LU-2216N-7/-2266N-7 are developed with a longer distance from the machine arm to needle ... a full 650mm. The long arm unisonfeed lockstitch machine with vertical-axis large hook with automatic thread trimmer is best-suited to processes that require a longer distance from the machine arm to needle, such as reinforcement stitching and topstitching in tape attachment processes for sewing furniture or car seats. The machine runs at a top sewing speed of 3,000rpm, sharply increasing productivity. The machine also adopts a fully automatic lubricating method, as well as a DL device that increases the lift of the presser foot and lets the user adjust the alternating vertical movement of the walking foot and presser foot by a simple, one-touch operation. The result is improved maintainability and operability. LU-2266N-7-0B/XC-E500 (XC-E500 operation panel is optionally available.)

Distance from machine arm to needle as long as 650mm. The machine responds outstanding it to the sewing of large, heavy materials such as car seats and furniture. The machine adopts a fully automatic lubricating method. Some gauge used in the LU-2210N/-2260N Series With fully automatic lubrication, the cumbersome task of oiling the machine by hand is eliminated. Oil is forcedly circulated through the face plate by a plunger pump. This prevents oil leakage from the face plate. The gauge (hook, bobbin, walking foot, presser foot and feed) used in the LU-2210N/-2260N Series is also used in this...

INTERCHANGEABLE GAUGE PARTS LU-2216N-7 Sewing conditions Presser foot For material with overlapped section Allows the smooth feed of multilayered portions of the material Standard (pressing face is reduced) For material with overlapped section 107-12651 Used for resilient materials including sponge Used for more resilient materials Right single-sided presser Right single-sided presser Left single-sided presser Used for sewing material edges Used for sewing material edges Left single-sided presser Used for the general piping process Adjustable presser for piping 3 4 5 6 Wide type The position...

Model name Needle gauge Lift of the presser foot Auto lifter Provide as standard (pneumatic auto-lifter: AK115) Thread take-up Link type Alternating vertical movement Vertical axis 1.6 fold-capacity hook Needle (at the time of delivery) Safety mechanism JUKI New Defrix Oil No.1 (equivalent to ISO VG7) Distance from needle to machine arm Weight of the machine head Automatic reverse feed function Compressed air and air consumption Single-phase 110 Power requirement WHEN YOU PLACE ORDERS Please note when placing orders, that the model name should be written as follows: Walking foot Presser foot...