■ SPECIFICATIONS Model name DLN-6390 DLN-6390-7 (with automatic thread trimmer) High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook DLN-6390-7 Bottom-folding and hemming (lockstitch type) 5,000sit/min* Standard gears: 3.2mm (2.8mm) / Supplied gears: 2.3mm, 3.6mm / Optional gears: 2.1mm, 2.5mm, 4.2mm (utilized by changing pitch conversion gears) Stitch length SCHMETS UY180GVS Nm140 range of use: Nm90~Nm150 (equivalent to #14~#22.5) Automatic-lubrication type exclusive full-rotary 1.7-fold hook Lift of the presser foot Feed system The last word in cylinder-bed lockstitch machines, intended for bottom hemming processes for jeans, casual pants and work uniforms has been launched. Binder open/close type Manual type Compressed air and air consumption Lubrication JUKI New Defrix Oil No.1 (equivalent to ISO VG7) Cylinder-bed diameter Weight of the machine head ✽ Pulley sizes are described in the Instruction Manual. “ stands for“Stitches per Minute” * sit/min” ■ DEVICE CONFIGURATIONS BY MODEL Pneumatic AK device (auto-lifter) Pneumatic binder (coupled to the AK device) Manual binder (coupled to the presser lifter) Needle cooler Thread trimmer Edge guide Mechanical valve type, provided with regulator Thread trimmer air blower Machine head Mechanical wiper The needle cooler helps reduce the occurrence of thread breakage caused by needle heat when sewing is performed at a speed of 4,000sti/min or more. The components differ with the type of machine head, i.e, with or without the thread trimmer. Selections should be made by referring to the following table. Solenoid valve type, not provided with regulator Needle cooler ■ WHEN YOU PLACE ORDERS Please note when placing orders, that the model name should be written as follows: ●Without automatic thread trimmer ●With automatic thread trimmer Wiper and automatic reverse feed function Wiper Provided Automatic reverse feed function Not provided High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook With needle cooler ●To order, please contact your nearest JUKI distributor. CM001 An environmental management system to promote and conduct the following: (1) Eco-friendly development of products and technologies (2) Green procurement and green purchasing (3) Energy conservation (reduction in carbon-dioxide emissions) (4) Resource saving (reduction of papers purchased, etc.) (5) Reduction and recycling of waste in the activities of research, development, design, sales, distribution, and maintenance services of industrial sewing machines and industrial robots, etc., including sales and maintenance services of data entry systems. 2-11-1, TSURUMAKI, TAMA-SHI, TOKYO 206-8551, JAPAN PHONE : (81) 42-357-2254 FAX : (81) 42-357-2274 INDUSTRIAL SEWING MACHINE DIV. ✽ Specifications and appearance are subject to change without prior notice for improvement. ✽ Read the instruction manual before putting the machine into service to ensure safety. ✽ This catalogue prints with environment-friendly soy ink on recyc

This newest and most advanced machine has been developed in the pursuit of upgraded seam quality and improved workability in bottom hemming processes. The machine offers excellent seam quality and sewing capabilities. Highly consistent and reliable thread trimmer mechanism. The lubrication mechanism effectively reduces oil stains on the material. ●The needle bar stroke is as high as 35mm. This offers increased penetration of the needle into the material to improve adaptability to heavy-weight materials. ●The machine demonstrates excellent sewing capabilities, when sewing heavy-weight denim or...

This newest and most advanced machine has been developed in the pursuit of upgraded seam quality and improved workability in bottom hemming processes. The machine offers excellent seam quality and sewing capabilities. Highly consistent and reliable thread trimmer mechanism. The lubrication mechanism effectively reduces oil stains on the material. ●The needle bar stroke is as high as 35mm. This offers increased penetration of the needle into the material to improve adaptability to heavy-weight materials. ●The machine demonstrates excellent sewing capabilities, when sewing heavy-weight denim or...

Model name * Pulley sizes are described in the Instruction Manual. * “sit/min” stands for “Stitches per Minute” ■ DEVICE CONFIGURATIONS BY MODEL ■ OPTIONS Needle cooler The needle cooler helps reduce the occurrence of thread breakage caused by needle heat when sewing is performed at a speed of 4,000sti/min or more. The components differ with the type of machine head, i.e, with or without the thread trimmer. Selections should be made by referring to the following table. Machine head ■ WHEN YOU PLACE ORDERS Please note when placing orders, that the model name should be written as follows: •Without...