AMS-224EN Series
8Pages

Catalog excerpts

AMS-224EN Series Computer-controlled Cycle Machine with Input Function AMS-224EN Series The machine speedily finishes a wider sewing area. It substantially reduces the cycle time.

Open the catalog to page 1

The machine achieves the highest sewing speed of 2,500sti/min am With its higher productivity, the machine is applicable to various The AMS-224EN-4530 [450mm(X)×300mm(Y)] The AMS-224EN-6030 [600mm(X)×300mm(Y)] A newly developed encoder-controlled stepping motor system has been adopted for the X-Y feed mechanism. This contributes to more accurate sewing performance and increased productivity. The machine not only achieves higher productivity due to instantaneous increases/decreases in sewing speed at the beginning /end of sewing and increased speed of thread trimming, but also achieves a...

Open the catalog to page 2

ong those with a similar sewing area. materials and stitching types. Power consumption is substantially reduced Power consumption during operation Power conservation The AMS-224EN has been designed laying importance on electrical power saving for increased economization. The machine has adopted the direct-drive system utilizing a compact-sized AC servomotor to drive the machine head. It has also adopted an encoder control system which drives the stepping motor with a minimum electrical power according to the weight of the material and stitch length for the material-feeding X-Y drive. With...

Open the catalog to page 3

The machine comes with various features for achieving beautiful seams. With these features, the machine ves dramatically improves seam quality. Quality The position of the feed can be checked during ring sewing by means of the encoder-controlled X-Y drive stepping motor. This remarkably improves ves accuracy of the feed. As a result, deformation of a sewing pattern which is likely to occur when sewing wing at a high speed or sewing a heavy-weight material erial is significantly reduced. Semi-dry head The frame (needle bar unit and thread take-up unit) is lubricated with grease, and the hook...

Open the catalog to page 4

The machine has been designed to achieve operator-friendliness. Its large-sized liquid crystal touch panel that supports USB substantially improves workability. Operability Hand pulley With the hand pulley which is laid out on the machine arm, not only the height of the needle bar or intermediate presser but also the needle entry point at the time of data programming can be adjusted with ease The large-sized liquid crystal touch panel, which has been developed to ensure ease of operation, dramatically increases efficiency in edit work. The IP-420 touch panel offers market-proven ease of...

Open the catalog to page 5

Options Programming software for computer-controlled sewing machines PM-1 Ver.3 On the PM-1 programming software, a sewing data shape can be checked more precisely as compared with the IP-420. As a result, frequent trial stitching can be directly done in repetition when editing complicated and fine sewing shape data, thereby allowing the operator to create a sewing shape as desired free from stress possibly caused by editing. Devices / Parts Description Wiper relay cable asm. Cassette holder fixing base (asm.) for 4530 Cassette holder fixing base (asm.) for 6030 Lower plate blank for 4530...

Open the catalog to page 6

AMS-224EN Series Work clamp blank for machining Part No. Aluminum blank plate for the 4530 Aluminum blank plate for the 6030 The blank plate is to be fixed onto the monolithic feeding frame from the underside. Feed plate blank for machining Part No. Feed plate inner plate sheet (with adhesive tape) for the 4530 Feed plate aluminum inner plate for the 4530 Feed plate plastic inner plate for the 4530 Feed plate inner plate sheet (with adhesive tape) for the 6030 Feed plate aluminum inner plate for the 6030 Feed plate plastic inner plate for the 6030 Fit the inner plate in the feed plate and...

Open the catalog to page 7

SPECIFICATIONS Model name Application Feeding frame type Medium-to heavy-weight Extra heavy-weight Medium-to heavy-weight Extra heavy-weight Monolithic feeding frame: (Pneumatic work clamp) Double-stepped stroke feeding frame: (Pneumatioc work clamp) Monolithic feeding frame: (Pneumatic work clamp) Double-stepped stroke feeding frame: (Pneumatioc work clamp) Max. sewing speed Sewing area 2,500sti/min* (stitch length 3mm or less) 450mm (X) ×300mm (Y) Settable stitch length Lift of the feeding frame Lifting amount : 20mm / Stroke : Standard 4mm (0 10mm) Lift / Stroke of intermediate presser...

Open the catalog to page 8

AMS-224EN Series 8Pages

Catalog excerpts

All Juki Industrial Sewing Machine catalogs and technical brochures

AMS-224EN Series
8Pages