GLOVE JUBA - 321CB GRANDEUR 70

Product catalog summary

Characteristics
These gloves are made from a blend of neoprene and natural rubber, providing strong resistance to chemical permeation. They are anatomically shaped and flocked for comfort, chlorinated for enhanced protection, low in soluble proteins, treated with bactericide, and have an additional coating for increased resistance.

Applications
The gloves are suitable for use in the chemical industry, maintenance and heavy industry, agriculture, construction, waste collection, industrial cleaning, and laundry.

Product Specifications
The JUBA - 321CB Grandeur 70 gloves are heavy latex and neoprene unsupported gloves with a thickness of 0.70 mm. They are available in black and come in sizes XS to XL, with a length of 30 cm. Packaging includes 12 pairs per package and 144 pairs per box.

Standards
EN388:2016 - Protective gloves against mechanical risks. This standard tests for abrasion resistance, cut resistance, tearing strength, puncture resistance, and impact protection. Performance is indicated by numbers and letters.

Abrasion Resistance: Rated 1 to 4, with higher numbers indicating better resistance.
Cut Resistance (Coup Test): Rated 1 to 5, with 5 being the highest protection. If the material dulls the knife, the TDM test is used instead.
Tearing Strength: Rated 1 to 4, with 4 being the strongest.
Puncture Resistance: Rated 1 to 4, with 4 being the strongest.
Cut Resistance (TDM Test ISO 13997): Rated A to F, with F being the highest protection.
Impact Protection: Indicated by the letter P if present.

EN ISO 374:2016 - Protective gloves against dangerous chemicals and micro-organisms. This standard specifies testing for degradation and permeation for 18 chemicals, but does not reflect actual workplace protection duration.

Penetration: Gloves must not leak water or air.
Degradation: Determined for each chemical, reported in percentage.
Permeation: Breakthrough time evaluated, with Type A, B, and C classifications based on resistance to chemicals.

Micro-organisms
Gloves are tested against bacteria, fungi, and viruses (if requested) according to EN 374-5:2016.

Catalog excerpts

GLOVE JUBA - 321CB GRANDEUR 70 0,70 mm thickness heavy latex and neoprene unsupported gloves WORKING GLOVES SUITABLE FOR: Blend of neoprene and natural rubber for a trustful Chemical industry. permeation resistance to chemicals. Maintenance and heavy industry. Anatomical shape and flocked for extra comfort. Chlorinated to improve protection. Waste collection. Bactericide treatment. Industrial cleaning and laundry. Additional coating to enhance resistance. MORE INFORMATION Materials Latex / Neopreno

Open the catalog to page 1

EN388:2016 Protective gloves against mechanical risks According to this standard, characteristics such as abrasion resistance, cut resistance, tearing strength, puncture resistance and impact protection are tested. In conjunction with the pictogram, four numbers and one, or two letters, will be displayed. These signs indicate the performance of the glove. ABRASION RESISTANCE The material is subjected to abrasion by a sandpaper under a determined pressure. The protection level is indicated on a scale of 1 to 4 depending on the number of turns required until a hole appears in the material. The...

Open the catalog to page 2

MICRO-ORGANISMS All gloves must be tested against micro-organisms. The gloves are tested to protect against bacteria and fungi, but also viruses if requested, according to EN 374-5:2016.

Open the catalog to page 3

All Juba catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list