Technical Center in Europe Our Twin Screw Extruder, “TEX” has a lot of application incl. compounding, devolatizing, dewatering, etc. To meet any customer’s requirement, our trial center will help and satisfy you with our latest cutting-edge technologies. Please feel free to contact us if you are interested in our “TEX” Extruder and technology. The Japan Steel Works, Ltd. Plastics Machinery Business Division ■ Available Equipment Twin-screw extruder: TEX * * * * Type : TEX44 αⅡ (Screw dia. = 47mm) L/D: 59,5 (17 Blocks) Screw Speed : ～ 1081rpm Motor Power: 104kW Auxiliary equipment * * * * * Feeder (Loss in weight): 4 units Side Feeder: 2 units Injection Pump: 2 units Vacuum Pump: 1 unit Strand cutter: 1 unit ■ Special Features Special Technologies are available such as * Special Screw: TKD screw High conveying ability and low local heat & pressure, Appropriate Dispersion & Distribution for good mixing. *Special Barrel: NIC barrel Low local heat & pressure, High Dispersion & Distribution. *SFD “Side Feed Deaerator” Connected to vacuum pump that pulls out the air from the mineral filler to increase bulk density, which results in high throughput. ■ Location JSW Technical Center is located at inside of “Tigro Industries NV” whose address is “Bonner Strasse 243 40589 Dusseldorf Germany” . GPS Point is 51.166022, 6.854169. Japan Steel Works, Ltd. Tokyo Head Office Gate City Osaki West Tower 1-11-1, Osaki, Shinagawa-ku, Tokyo 141-0032, Japan Europe (Germany) China (Shanghai)