Emboss Tape • Auto lock mechanism with secure and good workability • EMI countermeasure • Compatibility with the VESA standard connector • Correspond to V-by-One HS which is one of the next-generation interface for flatscreen TV V-by-One is registered trademark of THine Electronics, lnc. Specifications ––––––––––––––––––– • Current rating: 0.3 A AC, DC • Voltage rating: 50 V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 60 mΩ max. After environmental tests/ 120 mΩ max. • Insulation resistance: 500 MΩ min. • Withstanding voltage: 200 VAC/minute • Applicable FFC: Conductor pitch/ 0.5 mm Conductor width/ 0.32 mm +0.03 Mating part thickness/ 0.33 - 0.01 mm This is 0.5mm pitch connector for FPC which has the exclusive GND contact and enables high-speed transmission with connecting to the impedance controlled FPC. Adopting the auto lock mechanism that makes lock by performing the one action of snap-in-work, the workability improvement is realized. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Connector outline Pattern prohibition area Pattern prohibition area Connector outline Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Tolerances are non-cumulative: ±0.03mm for a

FCH CONNECTOR Connector Dimensions (mm) A Signal contact: Copper alloy, nickel-undercoated, selective gold-plated Ground contact: Copper alloy, tin-plated Socket housing: Heat resisting resin, UL94V-0, black Cover housing: Heat resisting resin, UL94V-0, black RoHS compliance This product displays (LF)(SN) on a label. Note: This products listed above are supplied on embossed-tape. Lead section dimensions of FFC Shielded tape 4.5min (Shielded tape position) Reinforcing layer Shielded tape